Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +918048035791 (International callers) or 08048035791 (Indian callers).
Model: CC 603 - 1
Display: 4 + 4 Digit 0.5” & 0.39” 7 Seg RED LED Display
Range (any one): 1 – 20µS, 5 – 200µS, 10 to 2000µS, 1 to 20mS, 5 to 200mS
Resolution: 0.01µS to 0.1mS (depends on range)
Accuracy: ±1% of range ±1 digit
Cell Constant*: 0.01 / 0.1 / 1 (user selectable, depends on range)
Temperature Sensor: RTD – PT 100 (3 wire)
Temperature Co-efficient: 0 to 3% / °C (user adjustable)
Temperature Compensation: Manual / Automatic (-20.0 to +150.0°C)
Electrode Input: Conductivity cell on rear panel
Set Point – 1 & 2: Two set points with 6 relay status selectable
Relay Output:
Relay-1 for Setpoint-1, Relay-2 for Setpoint-2 with 5A rating
Relay Hysteresis: 0 to 500 counts (user adjustable)
(only for High & Low control modes)
Relay Cyclic Delay: 0 to 100 seconds (user adjustable)
(only for High & Low control modes)
Alarm Output (optional): Inbuilt audible buzzer with front key reset
Optional Re-Tx Output: Galvanically isolated 4 – 20 mA
Optional Comm. Output: Isolated RS-485
Comm. Protocol: MODBUS RTU
Operating Environment: -10 to 50°C / 10 to 95% RH non-condensing
Power Supply: 90 to 270V AC / DC, 50Hz
Dimension: 96 × 96 × 85 mm
Cutout Dimension: 92 × 92 mm
Weight: 350 grams (Approx.)