Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +9108048035791 (International callers) or 08048035791 (Indian callers).
MODEL BCAL : 502
Display : 4+4 digit 7 segment LED Display
Temperature Range : 50 to 500 °C
Resolution : 0.1°C
Stability : ± 0.2 °C
Uniformity in aperture area: ± 0.5°C@50°C, ± 1.7@250°C , ± 2.5@500°C
Heating Time (to Max) : 40 Minutes
Cooling Time (to Max) : 40 Minutes to 100°C
Aperture area : 25 mm
Emissivity : 0.950
Power Supply : 230V AC ± 10% / 50Hz (Optional 110V AC)
Power Consumption : 500 VA
Instrument Weight : 4.5 kg
Model : BCAL 1202
Display : 4.3 inch True TFT DISPLAY with touch screen
Temperature Range : 500 to 1200°C
Resolution : 0.1 °C
Stability : ± 0.2 °C
Radial Uniformity : Better than ± 1% of reading
Temperature Read out : °C
Heating time : 60 min (Amb. to 1200 °C)
Cooling time : 120 min (1200 to 100 °C)
Stabilization time : 30 minutes
Aperture area : 25 mm
Emissivity : 0.950
Power supply : 230V AC ± 10% / 50Hz (Optional 110V AC)
Power Consumption : 2200 VA
Overall Dimension in mm : 350 x 352 x 210 (L x B x H)(Approx.)
Instrument Weight : 12 kg(without carrying case)(Approx.)
“SANSEL” Series BCAL 1502 is a Micro controller Based Precision Temperature Calibrators Generates True Reference Temperature. The Temperature Controller of the Calibrators Uses a Auto Tune PID Control Algorithm. Infra red thermometer & online pyrometer calibration is performed by comparison of the temperature measured by UUC and target temperature indicated by the calibrator or using standard pyrometer. Focus the Unit Under Calibration (UUC) to be Calibrate to the target point given in BCAL 1502. Set the Temperature from the Touch screen display. Both True and set Temperature can be read. When Stabilization Occurs, Simply Read the Temperature and re-Calibrate the UUC.
Model: BCAL 1502
Display: 4.3 inch True TFT LCD Display with Touch screen
Temperature Range: 500 to 1500 °C
Resolution: 0.1°C
Stability: ± 1°C
Radial Uniformity: ± 1% of reading
Bath Temperature Control: Digital Temperature Controller with Auto Tune PID Algorithm
Temperature readout: °C
Aperture area: 30mm
Emissivity: 0.950
Power supply: 230V AC ± 10% / 50Hz (Optional 110V AC)
Power Consumption: 4 KVA
Dimension (W*D*H) (Approx.): 580mm W x 450mm D x 390mm H
Instrument Weight (Approx): 45 kg
SANSEL Model BCAL 40, Black body Calibrator is used to measure the accuracy and performance of
non-contact fever detection systems, like medical thermometer & image scanner. Now it is being used in relation to COVID-19 (corona virus). This Blackbody Source meets the demand for a simple cost effective solution but high accurate device for the calibration of thermal imager and IR thermometers that are used at temperature around that of the human body.
Unlike Heat only devices, This model uses a solid state Heat & cool Technology, so that this can be generate both Heat and Cool. This having benefits to maintain the block temperature in different ambient temperature.
BCAL 40 using True colour 3.5” Touch screen display, easy to read multi parameter at the same time like Block temperature, Set temperature, Control status, Output % level, range of the equipment, displays both °C & °F and two Touch screen soft keys are used for settings and one more advantage of help menu to guide the operating Instruction of the equipment. Hence no need of hard copy of Instruction manual.
Model: BCAL 40
Display: 3.5 inch True TFT LCD Display with Touch screen
Temperature Range:
Body mode: 20 to 50°C / 68 to 122°F,
Surface mode: 0 to 100°C / 32 to 212°F
Resolution : 0.01°C
Stability: ± 0.03°C
Uniformity: ± 0.3°C
Stabilization Time: 10 minutes
Temperature readout: °C & °F at a time
Heating time: 10 mins (Amb. To 50°C )
Power supply: 90 to 260V AC/DC / 50/60Hz
Power Consumption: Less than 100 VA
Aperture area: 25mm
Emissivity: 0.950
Overall Dimension: 210 x 210 x 140 (L x B x H)(Approx.)
Instrument Weight: 3.7 kg
