calibration standard

Model : PCAL 1300 / 1 (Pneumatic) Display : 128 × 64 COG Graphic LCD with White LED Back Light Range (bar) : −0.9 to 1 bar Pressure Media : Air Resolution (bar) : 6 Digit User Selectable Accuracy : ± 0.05% FS Pressure Pump : PVP – 01 Instrument Port (at Pump) : 3/8” BSP Female Test Port (at Pump) : ¼” BSP Female Instrument Port : 3/8” BSP Male Pump Dimension in mm (Approx.) : 230 × 220 × 70 (H × W × D) Instrument Dimension in mm : 100 × 100 × 55 (W × H × D) Instrument Weight : 400 gms (Approx.) Stability Time : 1 to 2 mins Pressure Units (Selectable)* : bar, mbar, MPa, kPa, Pa, PSI, kg/cm², inHg, cmHg, mmHg, mH₂O, ftH₂O, inH₂O, cmH₂O, mmH₂O Pressure Zero : One Touch Zero Provided on Front Key Pressure Peak : Maximum & Minimum with User Reset Option Pressure Overflow : FS × 2 (Max.) Pressure Burst : FS × 3 (Max.) Temperature Measure : RTD – PT100 (2, 3, 4 Wire Selectable) Temperature Range : −199.999 to 850.000 mA Measure : 0–24 mA (Scalable) Display Scale : −99999 to 99999 Counts (for mA Measure Input) Switch Test : Provided Display Hold : One Touch Hold Provided on Front Key Power Supply : 9 V DC ±5% / 600 mAh Rechargeable Battery with Battery Life 20 Hours without Backlight (or) 9 V DC Adapter / 230 V AC Supply Operated PC Interface (Optional) : RS-485 (2 Wire) (Note: Connect to PC using USB to RS-485 Converter Supplied along with PC Software) PC Software (Optional) : Windows Based Semi-Automatic Calibration Software (Optional)

Model: Pcal 1300 / ± 350 mbar Range (bar): ± 350 mbar Pressure media: Air Pressure pump: PVP – 01 Display: 128 × 64 COG Graphic LCD with White LED Backlight Test Port (at pump): ¼” BSP Female Instrument port (at pump): 3/8” BSP Female Instrument Port: 3/8” BSP Male Pump dimension in mm (Approx.): 230 × 220 × 70 mm (H × W × D) Resolution (bar): 6 digit user selectable Instrument dimension: 100 × 100 × 55 (W × H × D) mm Instrument Weight: 400 gms (Approx.) Stability time: 1 to 2 mins Accuracy: ± 0.05% FS Pressure units * (selectable): bar, mbar, MPa, kPa, Pa, PSI, kg/cm², inHg, cmHg, mmHg, cmH₂O, mmH₂O Pressure Zero: One touch zero provided on front key Pressure Peak: Maximum & minimum with user reset option Pressure overflow: FS X 2 (Max.) Pressure burst: FS X 3 (Max.) Temp.Measure: RTD - PT 100 (2,3,4, wire selectable) Temp. Range: -199.999 to 850.000 mA Measure: 0-24 mA (scalable) Display scale: -99999 to 99999 counts (for mA measure input) Switch test: Provided Display Hold: One touch hold provided on front key Power Supply: 9V DC ±5% / 600 mAh Rechargeable battery with battery life 20 hours without backlight (or) 9V DC adapter / 230V AC supply operated Pump Weight (gms) (Approx.): 1.1 kg PC Interface (optional): RS-485 (2 wire) (Note: connect to PC using USB to RS 485 converter supplied along with PC software) PC Software (optional): Windows-based semi-automatic calibration software (optional)

Model : PCAL 1300 / 2 bar Range (bar) : −0.9 to 2 bar Pressure Media : Air Pressure Pump : PVP – 01, 02 Display : 128 × 64 COG Graphic LCD with White LED Back Light Instrument Port (at Pump) : 3/8” BSP Female Test Port (at Pump) : ¼” BSP Female Instrument Port : 3/8” BSP Male Pump Dimension in mm (Approx.) : PVP – 01 (230 × 220 × 70 mm (H × W × D)), PVP – 02 (230 × 140 × 65 mm (L × B × H)) Resolution (bar) : 6 Digit User Selectable Instrument Port (Extended) : ¼” BSP Male × 10 mm Long Instrument Dimension : 100 × 100 × 55 (W × H × D) mm Instrument Weight : 400 gms (Approx.) Stability Time : 1 to 2 mins Accuracy : ± 0.05% FS Pressure Units (Selectable)* : bar, mbar, MPa, kPa, Pa, PSI, kg/cm², inHg, cmHg, mmHg, mH₂O, ftH₂O, inH₂O, cmH₂O, mmH₂O Pressure Zero : One Touch Zero Provided on Front Key Pressure Peak : Maximum & Minimum with User Reset Option Pressure Overflow : FS × 2 (Max.) Pressure Burst : FS × 3 (Max.) Temperature Measure : RTD – PT100 (2, 3, 4 Wire Selectable) Temperature Range : −199.999 to 850.000 mA Measure : 0–24 mA (Scalable) Display Scale : −99999 to 99999 Counts (for mA Measure Input) Switch Test : Provided Display Hold : One Touch Hold Provided on Front Key Power Supply : 9 V DC ±5% / 600 mAh Rechargeable Battery with Battery Life 20 Hours without Backlight (or) 9 V DC Adapter / 230 V AC Supply Operated Pump Weight (gms) (Approx.) : PVP – 01 (1.1 kg), PVP – 02 (750 gms) PC Interface (Optional) : RS-485 (2 Wire) (Note: Connect to PC using USB to RS-485 Converter Supplied along with PC Software) PC Software (Optional) : Windows Based Semi-Automatic Calibration Software (Optional)

Model: Pcal 1300 / 1000 bar Range (bar): 0 to 1000 bar Pressure media: Oil & Water Pressure pump: CT – 02 Display: 128 × 64 COG Graphic LCD with White LED Backlight Resolution (bar): 6 digit user selectable Instrument Port: ½” BSP Male x 10 mm long Instrument dimension: 100 × 100 × 55 (W × H × D) mm Instrument Weight: 400 gms (Approx.) Stability time: 1 to 2 mins Accuracy: ± 0.05% FS PSI: 17400 Psi Over pressure: 120% Pressure units * (selectable): bar, mbar, MPa, kPa, Pa, PSI, kg/cm², inHg, cmHg, mmHg, mH₂O, ftH₂O, inH₂O, cmH₂O, mmH₂O Pressure Zero: One touch zero provided on front key Pressure Peak: Maximum & minimum with user reset option Pressure overflow: FS X 2 (Max.) Pressure burst: FS X 3 (Max.) Temp.Measure: RTD - PT 100 (2,3,4, wire selectable) Temp. Range: -199.999 to 850.000 mA Measure: 0-24 mA (scalable) Display scale: -99999 to 99999 counts (for mA measure input) Switch test: Provided Display Hold: One touch hold provided on front key Power Supply: 9V DC ±5% / 600 mAh Rechargeable battery with battery life 20 hours without backlight (or) 9V DC adapter / 230V AC supply operated Pump Weight (Approx.): 14 kg PC Interface (optional): RS-485 (2 wire) (Note: connect to PC using USB to RS 485 converter supplied along with PC software) PC Software (optional): Windows-based semi-automatic calibration software (Optional)

Model: Pcal 1300 / 350 bar Range (bar): 0 to 350 bar Pressure media: Oil & Water Pressure pump: HPP – 01 Display: 128 × 64 COG Graphic LCD with White LED Backlight Test Port (at pump): ¼” BSP Female Instrument port (at pump): 3/8” BSP Female Instrument Port: 3/8” BSP Male Pump dimension in mm (Approx.): 240 × 185 × 95 mm (H × W × D) Resolution (bar): 6 digit user selectable Instrument dimension: 100 × 100 × 55 (W × H × D) mm Instrument Weight: 400 gms (Approx.) Stability time: 1 to 2 mins Accuracy: ± 0.05% FS Pressure units * (selectable): bar, mbar, MPa, kPa, Pa, PSI, kg/cm², inHg, cmHg, mmHg, cmH₂O, mmH₂O Pressure Zero: One touch zero provided on front key Pressure Peak: Maximum & minimum with user reset option Pressure overflow: FS X 2 (Max.) Pressure burst: FS X 3 (Max.) Temp.Measure: RTD - PT 100 (2,3,4, wire selectable) Temp. Range: -199.999 to 850.000 mA Measure: 0-24 mA (scalable) Display scale: -99999 to 99999 counts (for mA measure input) Switch test: Provided Display Hold: One touch hold provided on front key Power Supply: 9V DC ±5% / 600 mAh Rechargeable battery with battery life 20 hours without backlight (or) 9V DC adapter / 230V AC supply operated Pump Weight (gms) (Approx.): 1.26 kg Switch test: Provided Display Hold: One touch hold provided on front key PC Interface (optional): RS-485 (2 wire) (Note: connect to PC using USB to RS 485 converter supplied along with PC software) PC Software (optional): Windows-based semi-automatic calibration software (optional)

Model: PCAL 1300 / 30 bar Range (bar): -0.9 to 30 bar Pressure media: Air Pressure pump: PVP – 02 Display: 128 × 64 COG Graphic LCD with White LED Backlight Instrument port (at pump): 3/8“ BSP Female Test Port (at pump): ¼” BSP Female Pump dimension in mm (Approx.): 230 × 140 × 65 mm (L × B × H) Resolution (bar): 6 digit user selectable Instrument Port: 3/8” BSP Male Instrument dimension: 100 × 100 × 55 (W × H × D) mm Instrument Weight: 400gms (Approx.) Stability time: 1 to 2 mins Accuracy: ± 0.05% FS Pressure units * (selectable): bar, mbar, MPa, kPa, Pa, PSI, kg/cm², inHg, cmHg, mmHg, mH₂O, ftH₂O, inH₂O, cmH₂O, mmH₂O Pressure Zero: One touch zero provided on front key Pressure Peak: Maximum & minimum with user reset option Pressure overflow: FS X 2 (Max.) Pressure burst: FS X 3 (Max.) Temp.Measure: RTD -PT 100 (2,3,4, wire selectable) Temp. Range: -199.999 to 850.000 mA Measure: 0-24 mA (scalable) Display scale: -99999 to 99999 counts (for mA measure input) Switch test: Provided Display hold: One touch hold provided on front key Power Supply: 9V DC ±5% / 600 mAh Rechargeable battery with battery life 20 hours without backlight (or) 9V DC adapter / 230V AC supply operated PC Interface (optional): RS-485 (2 wire) (Note: connect to PC using USB to RS 485 converter supplied along with PC software) PC Software (optional): Windows-based semi-automatic calibration software (Optional) Pump weight (gms) (Approx.): 750 gms

Model : PCAL 1300 / 20 bar Range (bar): -0.90 to 20 bar Pressure media: Air Pressure pump: PVP – 02 Display: 128 × 64 COG Graphic LCD with White LED Backlight Instrument port (at pump): 3/8“ BSP Female Test Port (at pump): ½“ BSP Female Instrument Port: 3/8“ BSP Male Pump Dimension: 230 × 140 × 65 mm (H × W × D) Instrument dimension: 100 × 100 × 55 (W × H × D) mm Pump Weight: 750 gms Instrument Weight: 400 gms (Approx.) Stability time: 1 to 2 mins Accuracy: ± 0.05% FS Pressure units * (selectable): bar, mbar, MPa, kPa, Pa, PSI, kg/cm², inHg, cmHg, mmHg, mH₂O, ftH₂O, inH₂O, cmH₂O, mmH₂O Pressure Zero: One touch zero provided on front key Pressure Peak: Maximum & minimum with user reset option Pressure overflow: FS X 2 (Max.) Pressure burst: FS X 3 (Max.) Temp.Measure: RTD - PT 100 (2,3,4, wire selectable) Temp. Range: -199.999 to 850.000 mA Measure: 0-24 mA (scalable) Display scale: -99999 to 99999 counts (for mA measure input) Switch test: Provided Keypad: Touch key Power Supply: 9V DC ±5% / 600 mAh Rechargeable battery with battery life 20 hours without backlight (or) 9V DC adapter / 230V AC supply operated PC Interface (optional): RS 485 (optional) PC Software (optional): Windows-based semi-automatic calibration software (optional)

Model: Pcal 1300 / 700 bar Range (bar): 0 to 700 bar Pressure media: Oil & Water Pressure pump: CT – 02 Display: 128 × 64 COG Graphic LCD with White LED Backlight Resolution (bar): 6 digit user selectable Instrument Port: ½” BSP Male x 10 mm long Instrument dimension: 100 × 100 × 55 (W × H × D) mm Instrument Weight: 400 gms (Approx.) Stability time: 1 to 2 mins Accuracy: ± 0.05% FS Pressure units * (selectable): bar, mbar, MPa, kPa, Pa, PSI, kg/cm², inHg, cmHg, mmHg, mH₂O, ftH₂O, inH₂O, cmH₂O, mmH₂O Pressure Zero: One touch zero provided on front key Pressure Peak: Maximum & minimum with user reset option Pressure overflow: FS X 2 (Max.) Pressure burst: FS X 3 (Max.) Temp.Measure: RTD - PT 100 (2,3,4, wire selectable) Temp. Range: -199.999 to 850.000 mA Measure: 0-24 mA (scalable) Display scale: -99999 to 99999 counts (for mA measure input) Switch test: Provided Display Hold: One touch hold provided on front key Power Supply: 9V DC ±5% / 600 mAh Rechargeable battery with battery life 20 hours without backlight (or) 9V DC adapter / 230V AC supply operated Pump Weight (Approx.): 14 kg PC Interface (optional): RS-485 (2 wire) (Note: connect to PC using USB to RS 485 converter supplied along with PC software) PC Software (optional): Windows-based semi-automatic calibration software (Optional)

MODEL : HCAL 1104U - V2 Display : 7” True Colour TFT Touch Screen Display Control Range* : 5 to 60°C / 3 to 95 % RH* Dew Point Temperature Range (Psychometric Calculated) : −30°C to 45°C Psychometric Calculated Indication : Dew / Frost Point (Dp / Fp), Wet Bulb Temperature (Tw), Vapour Partial Pressure (E), Vapour Saturation Pressure (Ew), Mixing Ratio by Weight (Dry) (g / kg), Enthalpy (H) (KJ / kg), Specific Humidity (Moisture) (g / kg), Absolute Humidity (Moisture) (g / m³), Volume Mixing Ratio (Dry) (ppm) Calculation Method : WMO Method Resolution : 0.01 °C / 0.01 % RH Display Stability : Better than ± 0.03 °C / ± 0.15 % RH Chamber Stability @ 25°C ** : Temperature ± 0.1°C, Humidity ± 0.3 % RH Chamber Uniformity @ 25°C ** : Temperature ± 0.2°C, Humidity ± 0.5 % RH Test Sensor Insert Port : Interchangeable Acrylic Door is provided on front side of the chamber with PG21 gland (cable or sensor size range from 13 to 18 mm) × 3 Nos External Humidifier Water Tank Capacity : 6 Litres (Approx.) (NOTE : 3 Liter filling is enough for our application) Humidifier Liquid : Distilled Water Humidifying Time : 2 % RH / sec (50 to 90 % RH) Dehumidifying Time : 6 % RH / sec (50 to 10 % RH) Test Chamber Area : 230 mm DIA × 170 mm D (Approx.) Power Supply : 230 V AC ± 10 % / 50 Hz (Optional 110 V AC) Power Consumption : 1000 VA Construction : Inner Chamber SS 310 / Outer MS Powder Coating Overall Dimension : 436 mm L × 676 mm W × 368 mm H (Approx.) Weight : 46 kg (Without Accessories) + 6 kg (Standard Accessories) (Approx.)

Model: TCAL 1401/ - 30 Display: 0.58” (15mm)(Block) / 0.3”(7.8mm) (Set) 4 digit LCD Display with 4 keys Temperature Range: -30 to 100°C (*@Ambient 25°C) Radial Uniformity: Better than 0.15°C Resolution: 0.1°C Stability: ± 0.1°C Temperature readout: °C Heating time: 20 mins (Amb. To 100 °C) Cooling time: 25 mins (25 to -30 °C) Stabilization time: 10 minutes Well Dimension (dia. X height): 22 x 120 mm Standard well holes in mm: 5.2, 6.2 & 6.2 Power supply: 230V AC ± 10% / 50Hz (Optional 110V AC) Power consumption: 500 VA Overall Dimension in mm: 490 x 178 x 357 (L x B x H)(Approx.) Instrument Weight: 12.5 kg (without well insert) (Approx.)

Model : TCAL 1401 / 600 Display : 0.58” (15mm) (Block) / 0.3”(7.8mm) (Set) 4 digit LCD Display with 4 keys Temperature Range : Amb.+5 to 600°C Resolution : 0.1°C Stability : ± 0.1°C Radial Uniformity : Better than ± 1°C Temperature Read out : °C Heating time : 30 mins (Amb. To 600 °C) Cooling time : 25 mins (600 to 100 °C) Stabilization time : 15 minutes Well Dimension (dia. X height) :30 x 110 mm Standard well holes in mm : 4.2, 6.2 , 6.2 & 8.5 Power supply : 230V AC ± 10% / 50Hz (Optional 110V AC) Power Consumption : 1200 VA Overall Dimension in mm : 285 x 125 x 275 (L x B x H)(Approx.) Instrument Weight : 7.5 kg (without well insert) (Approx.)

Model: TCAL 1501 / 300 Display: 4.3 inch True TFT LCD Display with Touch screen Temperature Range : Amb. to 300°C Resolution: 0.01°C Stability: ± 0.03°C Radial uniformity: Better than ± 0.2°C Measure inputs: RTD-PT 50, 100, PT 1000 / TC - J, K, R, S, T, E, B , N / mA, mV, ohms Temperature Readout: C Stabilization Time: 15 minutes Heating time: 30 mins (25 to 600°C) Cooling time: 50 mins (600 to 100°C ) Well Dimension: 30 x 150 mm (dia x height) Test sensor immersion depth: 140 mm Standard well holes in mm: 5.1, 6.2, 6.2 & 8.1 PC Interface (optional): RS 232 with automatic calibration software UUC Sensor supply output: 24V DC ± 10% / 50mA max. Power supply: 230V AC ± 10% / 50Hz (optional 110V AC) Power Consumption: 1200 VA Switch test: Provided Overall Dimension in mm: 285 x 155 x 330 (L x B x H) (Approx.) Weight: 8.5 kg (without well insert) (Approx.)

Model : TCAL 1503 / -40 Display : 4.3” True colour TFT display with touch screen Temperature Range : -40 to 120°C @23°C Ambient Resolution : 0.01 °C Block Stability : Better than ± 0.03°C at full range Block Radial Uniformity : ± 0.02°C at full range Block Axial Uniformity (upto 40mm) : ± 0.18°C at -45°C ± 0.1°C at 0°C ± 0.05°C at 50°C ± 0.11°C at 100°C ± 0.17°C at 120°C Temperature Read out : °C / °F (selectable) Loading effect: Better than ± 0.08°C hysteresis: Better than ± 0.03°C Cooling time : 30 mins (25 to -45 °C) 15 mins (25 to -30 °C) 65 mins (120 to 25 °C) Heating time : 25 mins (25 to 120 °C) 75 mins (-45 to 120 °C) 52 mins (-45 to 25 °C) Stabilization time: 10 minutes Insert (Dia. x Height): 30 x 160 mm Test sensor immersion depth: 130 mm Standard well holes in mm: Insert No. 1 → 5.1, 6.2, 6.2 & 8.1, Insert No. 2 → 6.2, 6.2 & 10.2 Measure inputs: RTD-PT 100, PT 1000 / TC - J, K, R, S, T, E, B , N , Analog – mA, V, mV, ohms Cold junction Accuracy: ± 0.3°C UUC Sensor supply input: 24V DC ± 10% / 50mA max. Power supply: 230V AC ± 10% / 50Hz (optional 110V AC) Power Consumption: 500 VA Switch Test : Provided Overall Dimension in mm: 390 x 185 x 356 (L x B x H) (Approx.) Weight: 17.3 kg (with well insert) (Approx.)

Model : TCAL 1503 / -100 Display : 4.3” True colour TFT display with touch screen Temperature Range : -100°C to 40°C @20°C to 30°C Ambient Resolution : 0.01 °C Block Stability (30 mins) : Better than ± 0.03°C at full range Block Radial Uniformity : ± 0.05 °C at full range Temperature Read out : °C / °F (selectable) Heating time : 25°C to 40°C : 30 min -100 to 25°C : 80 min Cooling Time: 25°C to -100°C : 85 min 40 to 25°C : 12 min Stabilization time : 15 minutes Insert Dia. x Height: 30 x 120 mm Test sensor immersion depth: 115 mm Standard well holes in mm : Insert No. 1 : 5.1, 6.2, 6.2 & 8.1 Insert No. 2 : 6.2, 6.2 & 10.2 Measure inputs: RTD – PT 100, PT 1000, TC – J, K, R, S, T, E, B, N , Analog – mA, V, mV, Ohms Cold junction Accuracy: ± 0.3°C Communication: RS 485 MODBUS Switch Test: Provided Sensor supply output: 24V DC ± 10% / 50mA max. Power supply: 230V AC ± 10% / 50Hz (Optional 110V AC) Power Consumption : 500 VA Overall Dimension in mm : 356 x 210 x 534 (L x B x H)(Approx.) Instrument Weight :15.9 kg(with well insert)(Approx.)

Model : TCAL 1503 / -35 Display : 4.3” True colour TFT display with touch screen Temperature Range : -35 to 120 °C @ 23 °C Ambient Resolution : 0.01 °C Block Stability : Better than ± 0.03°C at full range Block Radial Uniformity : ± 0.02°C at full range Block Axial Uniformity (upto 40mm) : ± 0.20°C at -35°C ± 0.05°C at 0°C ± 0.05°C at 50°C ± 0.17°C at 100°C Loading effect: Better than ± 0.08°C Hysteresis: Better than ± 0.03°C Heating time: 25 mins (25 to 120 °C) 75 mins (-35 to 120 °C) 52 mins (-35 to 25 °C) Cooling time: 25 mins (25 to -35 °C) 15 mins (25 to -30 °C) 65 mins (120 to 25 °C) Stabilization Time : 10 minutes Test sensor immersion depth: 130 mm Standard well holes in mm : Insert No. 1 →5.1, 6.2, 6.2 & 8.1, Insert No. 2 →6.2, 6.2 & 10.2 Measure inputs: RTD-PT 100, PT 1000 / TC - J, K, R, S, T, E, B , N , Analog – mA, V, mV, ohms Cold junction Accuracy: ± 0.3°C UUC Sensor supply input: 24V DC ± 10% / 50mA max. Switch Test : Provided Power supply : 230V AC ± 10% / 50Hz (Optional 110V AC) Power Consumption : 500 VA Overall Dimension in mm : 390 x 185 x 356 (L x B x H)(Approx.) Instrument Weight : 17.3 kg (with well insert)(Approx.)

MODEL BCAL : 502 Display : 4+4 digit 7 segment LED Display Temperature Range : 50 to 500 °C Resolution : 0.1°C Stability : ± 0.2 °C Uniformity in aperture area: ± 0.5°C@50°C, ± 1.7@250°C , ± 2.5@500°C Heating Time (to Max) : 40 Minutes Cooling Time (to Max) : 40 Minutes to 100°C Aperture area : 25 mm Emissivity : 0.950 Power Supply : 230V AC ± 10% / 50Hz (Optional 110V AC) Power Consumption : 500 VA Instrument Weight : 4.5 kg

Model : BCAL 1202 Display : 4.3 inch True TFT DISPLAY with touch screen Temperature Range : 500 to 1200°C Resolution : 0.1 °C Stability : ± 0.2 °C Radial Uniformity : Better than ± 1% of reading Temperature Read out : °C Heating time : 60 min (Amb. to 1200 °C) Cooling time : 120 min (1200 to 100 °C) Stabilization time : 30 minutes Aperture area : 25 mm Emissivity : 0.950 Power supply : 230V AC ± 10% / 50Hz (Optional 110V AC) Power Consumption : 2200 VA Overall Dimension in mm : 350 x 352 x 210 (L x B x H)(Approx.) Instrument Weight : 12 kg(without carrying case)(Approx.)

Model: TCAL 1501 / 600 Display: 4.3 inch True TFT LCD Display with Touch screen Temperature Range : Amb. +5 to 600°C Resolution: 0.01°C Stability: ± 0.05°C Radial uniformity: Better than ± 0.5°C Measure inputs: RTD-PT 100, PT 1000 / TC - J, K, R, S, T, E, B , N / mA, mV, ohms Temperature Readout: C Stabilization Time: 15 minutes Heating time: 30 mins (25 to 600°C) Cooling time: 50 mins (600 to 100°C ) Well Dimension: 30 x 150 mm (dia x height) Test sensor immersion depth: 140 mm Standard well holes in mm: 5.1, 6.2, 6.2 & 8.1 PC Interface (optional): RS 232 with automatic calibration software UUC Sensor supply output: 24V DC ± 10% / 50mA max. Power supply: 230V AC ± 10% / 50Hz (optional 110V AC) Power Consumption: 1200 VA Switch test: Provided Overall Dimension in mm: 285 x 155 x 330 (L x B x H) (Approx.) Weight: 8.5 kg (without well insert) (Approx.)

Model: TCAL 1501 / 1200 Display: 4.3” True TFT LCD Display with Touch screen Temperature Range: 300 to 1200°C Resolution: 0.1°C Stability: Better than ± 0.5°C Radial uniformity: Better than ± 2°C Stabilization Time: 30 minutes Temperature readout: °C Heating time: 50 mins (Amb. to 1200°C) Cooling time: 120 mins (1200 to 100°C ) Well Dimension: 39 x 180 x 140 mm (dia x height x depth) Standard well holes in mm: 5.2, 6.2, 6.2, 10.1 & 12.1 Power supply: 230V AC ± 10% / 50Hz (Optional 110V AC) Power Consumption: 1900 VA Overall Dimension in mm: 340 x 175 x 425 (L x B x H) (Approx.) Weight: 18 kg (without well insert) (Approx.)

Model: TCAL 1401 / 1200 Display: 0.58” (15mm)(Block) / 0.3”(7.8mm) (Set) 4 digit LCD Display with 4 keys Temperature Range: 500 to 1200°C Resolution: 1°C Stability: ± 2°C Radial Uniformity: Better than: ± 2°C Temperature readout: °C Heating time: 50 mins (Amb. To 1200 °C) Cooling time: 120 mins (1200 to 100 °C) Stabilization time: 30 minutes Well Dimension (dia. X height): 39 x 150 mm Standard well holes in mm: 5.2, 6.2, 6.2, 10.1 & 12.1 Power supply: 230V AC ± 10% / 50Hz (Optional 110V AC) Power consumption: 1900 VA Overall Dimension in mm: 340 x 175 x 425 (L x B x H)(Approx.) Instrument Weight: 18 kg (without well insert) (Approx.)

“SANSEL” Series BCAL 1502 is a Micro controller Based Precision Temperature Calibrators Generates True Reference Temperature. The Temperature Controller of the Calibrators Uses a Auto Tune PID Control Algorithm. Infra red thermometer & online pyrometer calibration is performed by comparison of the temperature measured by UUC and target temperature indicated by the calibrator or using standard pyrometer. Focus the Unit Under Calibration (UUC) to be Calibrate to the target point given in BCAL 1502. Set the Temperature from the Touch screen display. Both True and set Temperature can be read. When Stabilization Occurs, Simply Read the Temperature and re-Calibrate the UUC. Model: BCAL 1502 Display: 4.3 inch True TFT LCD Display with Touch screen Temperature Range: 500 to 1500 °C Resolution: 0.1°C Stability: ± 1°C Radial Uniformity: ± 1% of reading Bath Temperature Control: Digital Temperature Controller with Auto Tune PID Algorithm Temperature readout: °C Aperture area: 30mm Emissivity: 0.950 Power supply: 230V AC ± 10% / 50Hz (Optional 110V AC) Power Consumption: 4 KVA Dimension (W*D*H) (Approx.): 580mm W x 450mm D x 390mm H Instrument Weight (Approx): 45 kg