process control instruments

Model : HTP 196 Display : 3 line 4digit ,0.5” 7 segment LED Range : 0 to 60°C / 0to100%RH/ 0 to 2000mbarA Resolution : 0.01 or 0.1°C / 0.1% RH / 1 mbar Accuracy : ± 0.5 °C / ± 3%RH / ± 0.5 % FS Mounting : Wall mountable Power supply : 90 to 270V AC Dimension : 100 mm W x 250 mm H x60 mm D Weight : 640gms Sensor : P T-100, Humidity & Pressure sensor with 2 meter cable

Model : HTP 196 Display : 3 line 4digit ,0.5” 7 segment LED Parameter: Temperature, Humidity & Absolute or differential (pressure) Range : 0 to 60°C / 0to100%RH / 0 to 2000mbar A or ±50pa Resolution :0.01°C / 0.1%RH / 1mbar A (or) 0.01pa Accuracy : ± 0.5°C / ± 3%RH / ± 0.5 % FS Set point: Low & High for all three Parameter Relay: 2 relay with 5A rating with selectable parameter Sensor : PT-100, Humidity & Temperature sensor with 2 meter cable Operating Environment: 0 to 50°C / 20 to 95%RH Non condensing Mounting : Wall mountable with key hole provision Supply : 90 to 270V AC / 50Hz Buzzer: Inbuilt Dimension : 100 mm W x 250 mm H x60 mm D Weight : 640gms

Model: PIJ – 541 B1 Display: 2” or 4” or 8” 6 Digit 7 segment RED LED* Accuracy: ± 0.1 % of FS Analog inputs: 4 – 20 mA, 0 - 20 mA, 0 to 70 mV, 0 to 10 V DC, 0 – 400 Ω (H & L Limit Programmable) Temperature inputs: RTD - PT 100, PT 1000, Thermocouple - J, K, R, S, T, B, N, E Analog display range: -199999 to 199999 (H & L Limit programmable) Temperature range (H & L Limit programmable): RTD - PT 100 (-199.99 to 850.00°C / -327.5 to 1562.0 °F) RTD - PT 1000 (-50.0 to 400.0°C / -58.0 to 752.0 °F) TC - J (- 200 to 1200°C / -328 to 2192°F) TC - K (- 200 to 1372°C / -327 to 2501°F) TC - R (- 40 to 1768°C / -40 to 3214°F) TC - S (- 40 to 1768°C / -40 to 3214°F) TC - T (- 200 to 400°C / -328 to 752°F) TC - B (300 to 1820°C / 572 to 3308°F) TC - N (-200 to 1300°C / -327 to 2372°F) TC - E ( -200 to 1000°C / -327 to 1832°F) Unit selection: °C / °F ( for RTD & TC inputs) Analog input display resolution: 0.0001 / 0.001 / 0.01 / 0.1 / 1 (Selectable) Temperature resolution: 0.1 / 1 °C / °F (optional 0.01 for RTD - PT 100 I/P up to 99.99 °C Factory presetable) Filter constant: 1 – 100% (Adjustable) Display hold option: Peak, hold & average (any one selectable) Hold delay: 0 - 999 sec (selectable) Relay Output (option al): 2 Relay (5A rated) with 6 Relay Status Selection, Adjustable, Hysteresis, Cyclic Delay Re Transmission (optional): Opto Isolated Analog Output 4 - 20 mA or 0 - 10V DC PC communication (optional): RS 485 (2 wire) MODBUS RTU protocol PC interface software: Monitoring, Data logging, Report & Graph (Optional) Sensor Supply (external): 24 V DC ±10% @ 100 mA Power supply: 230 V AC / 50 Hz Overall dimension: 611 x 171 x 85 (L x H x D) mm (Approx.) Housing : MS Powder coating Mounting: Wall or sealing with 360 º rotatable clamp Operating environment: 0 - 50°C / 5 to 95% RH Non condensing Weight (Approx.): 5.5 (or) 8.5 kg

Model: PIJ – 542 A1 Display: 2” or 4” or 8” 4 Digit 7 segment RED LED* Accuracy: ± 0.1 % of FS Analog inputs: 4 – 20 mA, 0 - 20 mA, 0 to 70 mV, 0 to 10 V DC, 0 – 400 Ω (H & L Limit Programmable) Temperature inputs: RTD - PT 100, Thermocouple - J, K, R, S, T, B, N, E Analog display range: -1999 to 9999 (H & L Limit programmable) Temperature range (H & L Limit programmable): RTD - PT 100 (-199.9 to 850.0°C / -199.9 to 999.9 °F) TC - J (- 200 to 1200°C / -328 to 2192°F) TC - K (- 200 to 1372°C / -327 to 2501°F) TC - R (- 40 to 1768°C / -40 to 3214°F) TC - S (- 40 to 1768°C / -40 to 3214°F) TC - T (- 200 to 400°C / -328 to 752°F) TC - B (300 to 1820°C / 572 to 3308°F) TC - N (-200 to 1300°C / -327 to 2372°F) TC - E ( -200 to 999.9°C / -327 to 1832°F) Unit selection: °C / °F ( for RTD & TC inputs) Analog input display resolution: 0.001 / 0.01 / 0.1 / 1 (Selectable) Temperature resolution: 0.1 / 1 °C / °F (optional 0.01 for RTD - PT 100 I/P up to 99.99 °C Factory presetable) Filter constant: 1 – 100% (Adjustable) Display hold option: Peak, hold & average (any one selectable) Hold delay: 0 - 999 sec (selectable) Relay Output (optional): 2 Relay (5A rated) with 6 Relay Status Selection, Adjustable, Hysteresis, Cyclic Delay Temperature drift: ≤ 0.1% FS/°C (typical 50 ppm) Re Transmission (optional): Opto Isolated Analog Output 4 - 20 mA or 0 - 10V DC PC communication (optional): RS 485 (2 wire) MODBUS RTU protocol PC interface software: Optional Sensor Supply (external): 24 V DC ±10% @ 100 mA Power supply: 230 V AC / 50 Hz Overall dimension: 428 x 171 x 85 (L x H x D) mm (Approx.) Housing : MS Powder coating Mounting: Wall or sealing with 360 º rotatable clamp Operating environment: 0 - 50°C / 5 to 95% RH Non condensing Weight (Approx.): 4.5 kg

Model : DL 98HD Signal Input : RS 485(2 wire) Input Protocol : Modbus RTU Slave No. of. Channels : 32 FEATURES Ø It replace conventional 7 segment LED Ø Up to 32 input channels display Ø Custom selectable number of input No size limitation- Depends upon customer channels scope(HDMI compatible TV) Ø User configurable RS485 MODBUS setting Ø Low cost Ø User selectable title and Engineering units Ø Universal indicator for any type of industrial Ø Alarm set point and status indication process parameter Ø Adjustable display font size Ø Input from RS485 MODBUS RTU protocol Ø Custom adjustable colour, background, Ø HDMI output for display connectivity display, title and units Ø OLED TV display or any type of HDMI input Ø Inbuilt Data logging facility display device Ø Optional Ethernet output for computer Ø Pen drive option for Data download DISPLAY PARAMETER Temperature * Humidity * pressure * Flow & Total flow * Volume * Level * Production counting * RPM * m/min * Co2 * Volts * Current Power * pH * TDS * Conductivity, etc,. Application » Pharma industries » Automobile industries » Power industries » Petrochemical industries Food industries

Model: FI 593 Display : 16 Character X 2 Line LCD Display Input (factory settable): 4-20mA / 0-20mA / 0-2.5V / 0-5V / 0 - 10V / 0 - 75mV (any One) Accuracy at 25°C: ± 0.1% of FS Resolution : 1 / 0.1 / 0.01 (any One User Selectable) Display Modes: Flow Rate (FR) & Total Flow (TF) Display Range: 0 - 9999 (4 Digits) for FR , 0 - 99999999(8 Digits) for TF Units: m³ , Liter, Gallons (Selectable) Voltage Drop: 1 V Maximum (Applicable only for current input models) Input Impedance: 18K Ohms (Applicable only for voltage input models) Conversation Modes:Linear, Square Root (User Selectable) Flow Rate Time Base: Seconds, Minutes, Hours (Selectable) Sensor Supply: 24 V DC / 100mA Max. Power Supply: 90 to 270 V AC Operating Environment: 0 to 60°C / 5 to 95 % RH Non Condensing Frequency : 50 / 60 Hz

Model: FI 594 Display : 16 Character X 2 Line LCD Display Input: Pulse Accuracy at 25°C: ± 0.1% of FS Display Modes: Flow Rate (FR) , Total Flow (TF) & Batch Total (BT) Display Range: 0 - 99999(5 Digits) for FR , 0 - 99999999(8 Digits) for TF FR Resolution: 1 / 0.1 / 0.01 (any One Selectable) TF Resolution: 1 / 0.1 / 0.01 / 0.001 (any One Selectable) Units: m³ , Liter, Gallons (Selectable) Flow Rate Time Base: Seconds, Minutes, Hours (Selectable) Password Protection: Provided for User & Supervisor separately Relay Output (optional): 2 Relay Output (5A rated)with Individual Assignment settings for FR, TF & BT) Retransmission Output (optional): Opto isolated 4 - 20mA or 0 - 10V DC (any one factory Presettable) Communication: RS 485 (2 wire) / MODBUS RTU / RS 232 (any one factory Presettable) PC Software: Monitoring, Data logging, Report & Graph Sensor Supply: 5 or 12 V DC / 100mA Max. Operating Environment: 0 to 50 Deg C / 20 to 95 % RH Non Condensing Power Supply: 90 to 270 V AC, 50/60Hz

Model : HTP-190 Display : 1 line , 4digit 0.5” , 7 segment LED Parameter : Temperature Range : 0 t o 60°C Resolution : 0.0 1°C Accuracy : ± 0.5 °C Set point : Low & High Relay : 1 relay with 5Arating Weight : 520gms Sensor : PT-100 sensor with 2 meter cable Operating Environment: 0 to 50°C / 20 to 95%RH Non condensing Supply : 90 to 270V AC / 50Hz Dimension: 100 mm W x 250 mm H x60 mm D Mounting : Wall mountable with key hole provision Buzzer: Inbuilt

Model : HTI 197 Display : 2 line , 4 digit , 0.5’’ 7 segment LED Parameter : Temperature & Humidity Range : 0 to 60°C / 0 to 100%RH Resolution : 0.01°C / 0.1%RH Set point: Low & High for both Parameter Accuracy : ± 0.5 °C / ± 3%RH Relay Output ( optional) : 2 relay with 5A rating Sensor : PT-100 & Humidity sensor with 2 meter cable Operating Environment: 0 to 50°C / 20 to 95%RH Non condensing Supply : 90 to 270V AC / 50Hz Dimension : 100 mm W x 250 mm H x 60 mm D Mounting : Wall mountable with key hole provision Buzzer: Inbuilt Weight : 540gms

Model: DTJ 71 A (4” DISPLAY) & DTJ 71 B (8”DISPLAY) Display: 4 Digit 4” & 8” Red 7 seg LED ( 1” & 2” on request) Range: 99.59, 999.9, 9999 secs / mins / hrs (programmable) Resolution: 0.01 sec / min / hrs External Input: START / HOLD / RESET (potential free contact inputs) Relay output: 2 NO, 2 NC 5 A Rated relay Power Supply: 230V AC / 50Hz Working temperature: 0 – 50°C

Model : DL 96 / DL 97 No. of Channel : 8 or 16 or 32 Channel Sampling Rate : 100 msec (per channel) Memory : 20000 Readings (per channel) Data Download : USB Pen Drive / PC / Dot Matrix Printer Operating Voltage : 100–240 VAC @ 50 / 60 Hz Bezel Dimension DL 96 : 100 (H) × 110 (W) mm Bezel Dimension DL 97 : 195 (H) × 295 (W) mm Cut-out Size DL 96 : 92 (H) × 92 (W) mm Cut-out Size DL 97 : 175 (H) × 255 (W) mm Unit Dimension DL 96 : 100 (H) × 110 (W) × 150 (D) mm Unit Dimension DL 97 : 195 (H) × 295 (W) × 80 (D) mm Display DL 96 : 3.5 inch Multi-Color Active Matrix Touch Screen Display Display DL 97 : 8 inch Multi-Color Active Matrix Touch Screen Display Input Pt100 : −199.9 ~ 300.0 °C, Accuracy ±0.5 °C Input K : −100 ~ 1200 °C, Accuracy ±1.2 °C Input J : −100 ~ 1000 °C, Accuracy ±1.2 °C Input N : −100 ~ 1300 °C, Accuracy ±1.2 °C Input T : −100.0 ~ 400.0 °C, Accuracy ±0.8 °C Input S : 0 ~ 1500 °C, Accuracy ±3 °C Input R : 0 ~ 1500 °C, Accuracy ±3 °C Input 0–20 mA : −1999 ~ 9999, Accuracy ±0.15% FS Input 4–20 mA : −1999 ~ 9999, Accuracy ±0.15% FS Input 0–1 V : −1999 ~ 9999, Accuracy ±0.15% FS Input 0–10 V : −1999 ~ 9999, Accuracy ±0.15% FS Weight DL 96 : 0.800 Kg Weight DL 97 : 1.5 Kg

Model: DC 330 Display: 6 digit 0.3“ seven segment LED display Range: 0 – 999999 counts Resolution: 1 count / pulse Input: 3 - 30V DC pulse input from Proximity sensor, Photoelectric Non Contact Sensor, Encoder, Potential Free Contacts, Limit switch etc., Input speed: 3.5 kHz (max.) Sensor supply: 12V DC (± 10%) 50 mA Working temperature: 0 to 50°C Power supply: 90 – 270V AC / DC 50Hz Dimension: 36 x 72 x 65 mm Weight: 100 grams (Approx.)