Products

Model: PIJ – 541 B1 Display: 2” or 4” or 8” 6 Digit 7 segment RED LED* Accuracy: ± 0.1 % of FS Analog inputs: 4 – 20 mA, 0 - 20 mA, 0 to 70 mV, 0 to 10 V DC, 0 – 400 Ω (H & L Limit Programmable) Temperature inputs: RTD - PT 100, PT 1000, Thermocouple - J, K, R, S, T, B, N, E Analog display range: -199999 to 199999 (H & L Limit programmable) Temperature range (H & L Limit programmable): RTD - PT 100 (-199.99 to 850.00°C / -327.5 to 1562.0 °F) RTD - PT 1000 (-50.0 to 400.0°C / -58.0 to 752.0 °F) TC - J (- 200 to 1200°C / -328 to 2192°F) TC - K (- 200 to 1372°C / -327 to 2501°F) TC - R (- 40 to 1768°C / -40 to 3214°F) TC - S (- 40 to 1768°C / -40 to 3214°F) TC - T (- 200 to 400°C / -328 to 752°F) TC - B (300 to 1820°C / 572 to 3308°F) TC - N (-200 to 1300°C / -327 to 2372°F) TC - E ( -200 to 1000°C / -327 to 1832°F) Unit selection: °C / °F ( for RTD & TC inputs) Analog input display resolution: 0.0001 / 0.001 / 0.01 / 0.1 / 1 (Selectable) Temperature resolution: 0.1 / 1 °C / °F (optional 0.01 for RTD - PT 100 I/P up to 99.99 °C Factory presetable) Filter constant: 1 – 100% (Adjustable) Display hold option: Peak, hold & average (any one selectable) Hold delay: 0 - 999 sec (selectable) Relay Output (option al): 2 Relay (5A rated) with 6 Relay Status Selection, Adjustable, Hysteresis, Cyclic Delay Re Transmission (optional): Opto Isolated Analog Output 4 - 20 mA or 0 - 10V DC PC communication (optional): RS 485 (2 wire) MODBUS RTU protocol PC interface software: Monitoring, Data logging, Report & Graph (Optional) Sensor Supply (external): 24 V DC ±10% @ 100 mA Power supply: 230 V AC / 50 Hz Overall dimension: 611 x 171 x 85 (L x H x D) mm (Approx.) Housing : MS Powder coating Mounting: Wall or sealing with 360 º rotatable clamp Operating environment: 0 - 50°C / 5 to 95% RH Non condensing Weight (Approx.): 5.5 (or) 8.5 kg

Model: PIJ – 542 A1 Display: 2” or 4” or 8” 4 Digit 7 segment RED LED* Accuracy: ± 0.1 % of FS Analog inputs: 4 – 20 mA, 0 - 20 mA, 0 to 70 mV, 0 to 10 V DC, 0 – 400 Ω (H & L Limit Programmable) Temperature inputs: RTD - PT 100, Thermocouple - J, K, R, S, T, B, N, E Analog display range: -1999 to 9999 (H & L Limit programmable) Temperature range (H & L Limit programmable): RTD - PT 100 (-199.9 to 850.0°C / -199.9 to 999.9 °F) TC - J (- 200 to 1200°C / -328 to 2192°F) TC - K (- 200 to 1372°C / -327 to 2501°F) TC - R (- 40 to 1768°C / -40 to 3214°F) TC - S (- 40 to 1768°C / -40 to 3214°F) TC - T (- 200 to 400°C / -328 to 752°F) TC - B (300 to 1820°C / 572 to 3308°F) TC - N (-200 to 1300°C / -327 to 2372°F) TC - E ( -200 to 999.9°C / -327 to 1832°F) Unit selection: °C / °F ( for RTD & TC inputs) Analog input display resolution: 0.001 / 0.01 / 0.1 / 1 (Selectable) Temperature resolution: 0.1 / 1 °C / °F (optional 0.01 for RTD - PT 100 I/P up to 99.99 °C Factory presetable) Filter constant: 1 – 100% (Adjustable) Display hold option: Peak, hold & average (any one selectable) Hold delay: 0 - 999 sec (selectable) Relay Output (optional): 2 Relay (5A rated) with 6 Relay Status Selection, Adjustable, Hysteresis, Cyclic Delay Temperature drift: ≤ 0.1% FS/°C (typical 50 ppm) Re Transmission (optional): Opto Isolated Analog Output 4 - 20 mA or 0 - 10V DC PC communication (optional): RS 485 (2 wire) MODBUS RTU protocol PC interface software: Optional Sensor Supply (external): 24 V DC ±10% @ 100 mA Power supply: 230 V AC / 50 Hz Overall dimension: 428 x 171 x 85 (L x H x D) mm (Approx.) Housing : MS Powder coating Mounting: Wall or sealing with 360 º rotatable clamp Operating environment: 0 - 50°C / 5 to 95% RH Non condensing Weight (Approx.): 4.5 kg

Model : DL 98HD Signal Input : RS 485(2 wire) Input Protocol : Modbus RTU Slave No. of. Channels : 32 FEATURES Ø It replace conventional 7 segment LED Ø Up to 32 input channels display Ø Custom selectable number of input No size limitation- Depends upon customer channels scope(HDMI compatible TV) Ø User configurable RS485 MODBUS setting Ø Low cost Ø User selectable title and Engineering units Ø Universal indicator for any type of industrial Ø Alarm set point and status indication process parameter Ø Adjustable display font size Ø Input from RS485 MODBUS RTU protocol Ø Custom adjustable colour, background, Ø HDMI output for display connectivity display, title and units Ø OLED TV display or any type of HDMI input Ø Inbuilt Data logging facility display device Ø Optional Ethernet output for computer Ø Pen drive option for Data download DISPLAY PARAMETER Temperature * Humidity * pressure * Flow & Total flow * Volume * Level * Production counting * RPM * m/min * Co2 * Volts * Current Power * pH * TDS * Conductivity, etc,. Application » Pharma industries » Automobile industries » Power industries » Petrochemical industries Food industries

Model: TCAL 1404/500 Display: 2.8" True TFT with Touch screen Temperature Range: Amb. + 5 to 500 °C Radial uniformity: (Better than) ±0.05°C Resolution: 0.01 °C Stability: ±0.08 °C Temperature readout: °C Heating time: Amb to 500 --> 25 min Cooling time: 500 to 50--> 1 hr 20 min Stabilization time: 15 mins Well Dimension(dia. x height): 20 x 100 mm Well immersion depth: 90 mm Standard well holes in mm: 6.2 x 2nos Power supply: 230V AC ± 10% / 50Hz (Optional 110V AC) Power consumption: 350 w Overall Dimension in mm: 170 x 95 x 183 mm Instrument Weight: 3.75 Kg

Model: TCAL 1404/300 Display: 2.8" True TFT with Touch screen Temperature Range: Amb. + 5 to 300 °C Radial uniformity: (Better than) ±0.03°C Resolution: 0.01 °C Stability: ±0.04 °C Temperature readout: °C Heating time: Amb to 300 -->23 min Cooling time: 300 to 50-->30 min Stabilization time: 15 mins Well Dimension(dia. x height): 20 x 100 mm Well immersion depth: 90 mm Standard well holes in mm: 6.2 x 2nos Power supply: 230V AC ± 10% / 50Hz (Optional 110V AC) Power consumption: 250 w Overall Dimension in mm: 170 x 95 x 183 mm Instrument Weight: 2.75 Kg

Model TCAL: 1404/-15 Display: 2.8' True TFT with Touch screen Temperature Range: -15 to 120 °C Radial uniformity: (Better than) ±0.03°C Resolution: 0.01 °C Stability: ±0.03 °C Temperature readout: °C Heating time: Amb to 120-->25 min, -15 to Amb -->5 min Cooling time: Amb to -15 -->20 min, 120 to 50 -->8 min Stabilization time: 10 mins Well Dimension(dia. x height): 20 x 90 mm Well immersion depth: 90 mm (throw hole) Standard well holes in mm: 6.2 x 2nos Power supply: 80 to 264VAC / 113 to 370VDC / 47 to 63Hz Power consumption: 100 w Overall Dimension in mm: 170 x 95 x 183 mm Instrument Weight: 3.5 Kg

Model: TCAL 1404/-5 Display: 2.8' True TFT with Touch screen Temperature Range: -5 to 100°C Radial uniformity: (Better than) ±0.03°C Resolution: 0.01 °C Stability: ±0.03 °C Temperature readout: °C Heating time: Amb to 100-->15min, -5 to Amb -->3 min Cooling time: Amb to -5 -->15min, 100 to 50-->4 min Stabilization time: 10 mins Well Dimension(dia. x height): 20 x 90 mm Well immersion depth: 90 mm (throw hole) Standard well holes in mm: 6.2 x 2nos Power supply: 80 to 264VAC / 113 to 370VDC / 47 to 63Hz Power consumption: 100 w Overall Dimension in mm: 170 x 95 x 183 mm Instrument Weight: 3.5 Kg

We are a leading service provider for calibration of various types of parameters in all industries and our lab is accredited by (NABLNABL)national accreditation board for testing and calibration laboratories from Chennai, Tamil Nadu, India. Very Low Pressure ± 25 mbar Type of Instruments Calibrated Manometer Low pressure Transducer/Transmitter Gauges Differential Pressure Indicator/Tranmitter Pressure Data Logger Pressure switch Low pressure Calibrators,etc., Absolute Pressure: 0.60 bar to 2 bar Type of Instruments Calibrated Barometers Aneroid barometer Absolute gauges Absolute pressure sensor/Tranmitter Absolute pressure indicator/ controller Logger and Calibrators etc Vacuum: -0.1 bar to -0.99 bar Type of Instruments Calibrated Vacuum Gauge Vacuum Tranduer/Transmitter Vacuum Indicator/Controller/Switch Vacuum Logger Calibrators etc., Pressure(Hydraulic and Pneumatic) 1 bar to 1000 bar and 0.1 bar to 35 bar Type of Instruments Calibrated Pressure Calibrators Pressure Transducer Pressure Transmitter Digital Pressure Gauges Pressure Controller Pnueumatic pressure gauges Hydraulic Pressure gauges Differential pressure indicators, etc., Mass/Weight 1 mg to 50 kg Type of Instruments Calibrated(Accuracy class: E2,F1,F2,M1,M2,ETC.,) Standard weight box Weights, etc., Weighing Scale and Balance 1mg to 300 Kg Micro balance Analytical balance Digital balance Weighing Scale Volume 1µl to 5l Type of Instruments Calibrated Pipette Burette Flask beaker

We are a leading service provider for calibration of various types of parameters in all industries and our lab is accredited by (NABL)National Accreditation Board for Testing and Calibration laboratories from Chennai, Tamil Nadu, India. Voltage : 1 mV to 1000 V AC/DC Current : 10 µA to 1000 A AC/DC TC, RTD : PT-100,J,K,R,S,T,E,B,N Resistance : 1 ohm to 100 G ohm Frequency : 1 Hz to 10 MHz Capacitance : 10 nF to 1 µF Type of Instruments Calibrated Multi Product Calibrator Multi Function Calibrator Digital Multimeter Frequency Counter Signal Generator Decade Resistance Box Meggar Power Supplies Analog Voltmeter/Ammeter Digital Voltmeter/Ammeter AC/DC Clamp meter Temperature Indicator/controller I/P,P/I Convertor Valve Positioner Process Flow Indicator LCR Meter Process Flow Totalizer, etc., High Voltage 1 kV to 30 kV Type of Instruments Calibrated AC/DC High Voltage source Timer 1s to 99999s Type of Instruments Calibrated Digital Timer Analog Timer Stop Watch, etc., Note: Price May vary based on quantity and instruments

We are a leading service provider for calibration of various types of parameters in all industries and our lab is accredited by (NABL)National Accreditation Board for Testing and Calibration laboratories from Chennai, Tamil Nadu, India. Temperature(Contact) Range from -80 deg C to 1500 deg c Type of Instruments Calibrated: Digital Thermometer Glass Thermometer Dry block Calibrators Thermocouple and RTD probes Thermistors Temperature Recorder Temperature Scanner/Data logger Temperature Indicator with sensor Temperature Gauge Temperature Transmitter Temperature bath,etc., Mapping and Validation for single or multi point Freezer incubator oven furnance Storage rooms clean rooms dryer cold rooms Environmental chambers Humidity Indicator/chamber, etc., Temperature(Non-Contact)Range from 0 deg c to 1500 deg c Type of Instruments Calibrated Non-Contact Pyrometers IR thermometer Black Body Source, ect., Humidity: Range from 5 to 60 deg c & 10 to 95% Type of Instruments Calibrated Humidity sensors/Transmitter Humidity/Temperature logger Analog hygrometer

Model: FI 593 Display : 16 Character X 2 Line LCD Display Input (factory settable): 4-20mA / 0-20mA / 0-2.5V / 0-5V / 0 - 10V / 0 - 75mV (any One) Accuracy at 25°C: ± 0.1% of FS Resolution : 1 / 0.1 / 0.01 (any One User Selectable) Display Modes: Flow Rate (FR) & Total Flow (TF) Display Range: 0 - 9999 (4 Digits) for FR , 0 - 99999999(8 Digits) for TF Units: m³ , Liter, Gallons (Selectable) Voltage Drop: 1 V Maximum (Applicable only for current input models) Input Impedance: 18K Ohms (Applicable only for voltage input models) Conversation Modes:Linear, Square Root (User Selectable) Flow Rate Time Base: Seconds, Minutes, Hours (Selectable) Sensor Supply: 24 V DC / 100mA Max. Power Supply: 90 to 270 V AC Operating Environment: 0 to 60°C / 5 to 95 % RH Non Condensing Frequency : 50 / 60 Hz

Model: FI 594 Display : 16 Character X 2 Line LCD Display Input: Pulse Accuracy at 25°C: ± 0.1% of FS Display Modes: Flow Rate (FR) , Total Flow (TF) & Batch Total (BT) Display Range: 0 - 99999(5 Digits) for FR , 0 - 99999999(8 Digits) for TF FR Resolution: 1 / 0.1 / 0.01 (any One Selectable) TF Resolution: 1 / 0.1 / 0.01 / 0.001 (any One Selectable) Units: m³ , Liter, Gallons (Selectable) Flow Rate Time Base: Seconds, Minutes, Hours (Selectable) Password Protection: Provided for User & Supervisor separately Relay Output (optional): 2 Relay Output (5A rated)with Individual Assignment settings for FR, TF & BT) Retransmission Output (optional): Opto isolated 4 - 20mA or 0 - 10V DC (any one factory Presettable) Communication: RS 485 (2 wire) / MODBUS RTU / RS 232 (any one factory Presettable) PC Software: Monitoring, Data logging, Report & Graph Sensor Supply: 5 or 12 V DC / 100mA Max. Operating Environment: 0 to 50 Deg C / 20 to 95 % RH Non Condensing Power Supply: 90 to 270 V AC, 50/60Hz