Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Model: TDS 100
Display: 0.5” 3 ½ Digit 7 segment Red LED
Range: 0 – 20 ppm/ 200 ppm/ 2000 ppm/ 20ppt / 200ppt ( 5 range selection using front rotary switch )
Resolution: 0.01 / 0.1 / 1 for ppm range & 0.01 / 0.1 for ppt range
Accuracy: ± 1 % of Range ± 1 digit
Temperature Compensation: 0 to 50°C (Manual) continuously adjustable
Cell Constant: Adjustable with indication on display
Sensor: Platinum Conductivity cell (1.0 cell constant) with Banana male connector
Input Connection: Banana socket
Operating Environment: 0 to 50 °C / 20 to 95 % RH non condensing
Power supply: 230V AC / 50 Hz ± 10%
Overall Dimensions in mm: 185 x 235 x 65 ( L x B x H )
Instrument weight: 1.6 kg (Approx.)
Model: pH 302
Display: 16 Character x 2 line LCD with Backlight
Range: 0 to 14 pH / -1999 to +1999 mV /0 – 150°C
Resolution: 0.01 pH / 1 mV / 0.1°C
Accuracy: ± 0.01 pH ± 1 digit / ± 1 mV ± 1 digit /± 0.5°C ± 1 digit
Input Impedance: > 10¹² Ohms
Temperature Compensation: 0 to 150°C Manual / Automatic
Electrode: Combined pH Electrode with BNC attachment
Temperature sensor: Provided with 3 pin female socket
pH / ORP Input connection: BNC socket
Operating Environment: 0 to 50 °C / 20 to 95 % RH non condensing
Temperature connection: 3 pin male socket
Power supply: 230V AC / 50 Hz ± 10%
Overall Dimensions in mm: 190 x 185 x 75 ( L x B x H )
Instrument weight: 1.7 kg (Approx.)
Model : HTP 196
Display : 3 line 4digit ,0.5” 7 segment LED
Parameter: Temperature, Humidity & Absolute or differential (pressure)
Range : 0 to 60°C / 0to100%RH / 0 to 2000mbar A or ±50pa
Resolution :0.01°C / 0.1%RH / 1mbar A
(or) 0.01pa
Accuracy : ± 0.5°C / ± 3%RH / ± 0.5 % FS
Set point: Low & High for all three Parameter
Relay: 2 relay with 5A rating with selectable parameter
Sensor : PT-100, Humidity & Temperature sensor with 2 meter cable
Operating Environment: 0 to 50°C / 20 to 95%RH Non condensing
Mounting : Wall mountable with key hole provision
Supply : 90 to 270V AC / 50Hz
Buzzer: Inbuilt
Dimension : 100 mm W x 250 mm H x60 mm D
Weight : 640gms
Model : PCAL 1300 / 1 (Pneumatic)
Display : 128 × 64 COG Graphic LCD with White LED Back Light
Range (bar) : −0.9 to 1 bar
Pressure Media : Air
Resolution (bar) : 6 Digit User Selectable
Accuracy : ± 0.05% FS
Pressure Pump : PVP – 01
Instrument Port (at Pump) : 3/8” BSP Female
Test Port (at Pump) : ¼” BSP Female
Instrument Port : 3/8” BSP Male
Pump Dimension in mm (Approx.) : 230 × 220 × 70 (H × W × D)
Instrument Dimension in mm : 100 × 100 × 55 (W × H × D)
Instrument Weight : 400 gms (Approx.)
Stability Time : 1 to 2 mins
Pressure Units (Selectable)* : bar, mbar, MPa, kPa, Pa, PSI, kg/cm², inHg, cmHg, mmHg, mH₂O, ftH₂O, inH₂O, cmH₂O, mmH₂O
Pressure Zero : One Touch Zero Provided on Front Key
Pressure Peak : Maximum & Minimum with User Reset Option
Pressure Overflow : FS × 2 (Max.)
Pressure Burst : FS × 3 (Max.)
Temperature Measure : RTD – PT100 (2, 3, 4 Wire Selectable)
Temperature Range : −199.999 to 850.000
mA Measure : 0–24 mA (Scalable)
Display Scale : −99999 to 99999 Counts (for mA Measure Input)
Switch Test : Provided
Display Hold : One Touch Hold Provided on Front Key
Power Supply : 9 V DC ±5% / 600 mAh Rechargeable Battery with Battery Life 20 Hours without Backlight (or) 9 V DC Adapter / 230 V AC Supply Operated
PC Interface (Optional) : RS-485 (2 Wire) (Note: Connect to PC using USB to RS-485 Converter Supplied along with PC Software)
PC Software (Optional) : Windows Based Semi-Automatic Calibration Software (Optional)
Model: Pcal 1300 / ± 350 mbar
Range (bar): ± 350 mbar
Pressure media: Air
Pressure pump: PVP – 01
Display: 128 × 64 COG Graphic LCD with White LED Backlight
Test Port (at pump): ¼” BSP Female
Instrument port (at pump): 3/8” BSP Female
Instrument Port: 3/8” BSP Male
Pump dimension in mm (Approx.): 230 × 220 × 70 mm (H × W × D)
Resolution (bar): 6 digit user selectable
Instrument dimension: 100 × 100 × 55 (W × H × D) mm
Instrument Weight: 400 gms (Approx.)
Stability time: 1 to 2 mins
Accuracy: ± 0.05% FS
Pressure units * (selectable): bar, mbar, MPa, kPa, Pa, PSI, kg/cm², inHg, cmHg, mmHg, cmH₂O, mmH₂O
Pressure Zero: One touch zero provided on front key
Pressure Peak: Maximum & minimum with user reset option
Pressure overflow: FS X 2 (Max.)
Pressure burst: FS X 3 (Max.)
Temp.Measure: RTD - PT 100 (2,3,4, wire selectable)
Temp. Range: -199.999 to 850.000
mA Measure: 0-24 mA (scalable)
Display scale: -99999 to 99999 counts (for mA measure input)
Switch test: Provided
Display Hold: One touch hold provided on front key
Power Supply: 9V DC ±5% / 600 mAh Rechargeable battery with battery life 20 hours without backlight (or) 9V DC adapter / 230V AC supply operated
Pump Weight (gms) (Approx.): 1.1 kg
PC Interface (optional): RS-485 (2 wire) (Note: connect to PC using USB to RS 485 converter supplied along with PC software)
PC Software (optional): Windows-based semi-automatic calibration software (optional)
Model : PCAL 1300 / 2 bar
Range (bar) : −0.9 to 2 bar
Pressure Media : Air
Pressure Pump : PVP – 01, 02
Display : 128 × 64 COG Graphic LCD with White LED Back Light
Instrument Port (at Pump) : 3/8” BSP Female
Test Port (at Pump) : ¼” BSP Female
Instrument Port : 3/8” BSP Male
Pump Dimension in mm (Approx.) : PVP – 01 (230 × 220 × 70 mm (H × W × D)), PVP – 02 (230 × 140 × 65 mm (L × B × H))
Resolution (bar) : 6 Digit User Selectable
Instrument Port (Extended) : ¼” BSP Male × 10 mm Long
Instrument Dimension : 100 × 100 × 55 (W × H × D) mm
Instrument Weight : 400 gms (Approx.)
Stability Time : 1 to 2 mins
Accuracy : ± 0.05% FS
Pressure Units (Selectable)* : bar, mbar, MPa, kPa, Pa, PSI, kg/cm², inHg, cmHg, mmHg, mH₂O, ftH₂O, inH₂O, cmH₂O, mmH₂O
Pressure Zero : One Touch Zero Provided on Front Key
Pressure Peak : Maximum & Minimum with User Reset Option
Pressure Overflow : FS × 2 (Max.)
Pressure Burst : FS × 3 (Max.)
Temperature Measure : RTD – PT100 (2, 3, 4 Wire Selectable)
Temperature Range : −199.999 to 850.000
mA Measure : 0–24 mA (Scalable)
Display Scale : −99999 to 99999 Counts (for mA Measure Input)
Switch Test : Provided
Display Hold : One Touch Hold Provided on Front Key
Power Supply : 9 V DC ±5% / 600 mAh Rechargeable Battery with Battery Life 20 Hours without Backlight (or) 9 V DC Adapter / 230 V AC Supply Operated
Pump Weight (gms) (Approx.) : PVP – 01 (1.1 kg), PVP – 02 (750 gms)
PC Interface (Optional) : RS-485 (2 Wire) (Note: Connect to PC using USB to RS-485 Converter Supplied along with PC Software)
PC Software (Optional) : Windows Based Semi-Automatic Calibration Software (Optional)
Model: Tcal 1501 / -80
Display: 4.3 inch true TFT display with touch screen
Working Range: -80 to -40 °C
Resolution: 0.01 °C
Stability: ± 0.03 °C
Uniformity: ± 0.2 °C
Bath Temperature Control: Digital Temperature Controller with FUZZY PID
Multi Hole Well: Provided for Different type of Sensors, Sensor with Indicator & Thermometer Calibration
Cooling medium: IPA
Liquid Capacity: 5 Liters
Testing Area: 100mm W x 100mm H x 190mm D
Over all Dimension: 705mm L x 505mm W x 825mm H
Power Supply: 230V AC ± 10% / 50Hz (Optional 110V44 AC)
Weight: 80 kg (approx.)
Model: Pcal 1300 / 1000 bar
Range (bar): 0 to 1000 bar
Pressure media: Oil & Water
Pressure pump: CT – 02
Display: 128 × 64 COG Graphic LCD with White LED Backlight
Resolution (bar): 6 digit user selectable
Instrument Port: ½” BSP Male x 10 mm long
Instrument dimension: 100 × 100 × 55 (W × H × D) mm
Instrument Weight: 400 gms (Approx.)
Stability time: 1 to 2 mins
Accuracy: ± 0.05% FS
PSI: 17400 Psi
Over pressure: 120%
Pressure units * (selectable): bar, mbar, MPa, kPa, Pa, PSI, kg/cm², inHg, cmHg, mmHg, mH₂O, ftH₂O, inH₂O, cmH₂O, mmH₂O
Pressure Zero: One touch zero provided on front key
Pressure Peak: Maximum & minimum with user reset option
Pressure overflow: FS X 2 (Max.)
Pressure burst: FS X 3 (Max.)
Temp.Measure: RTD - PT 100 (2,3,4, wire selectable)
Temp. Range: -199.999 to 850.000
mA Measure: 0-24 mA (scalable)
Display scale: -99999 to 99999 counts (for mA measure input)
Switch test: Provided
Display Hold: One touch hold provided on front key
Power Supply: 9V DC ±5% / 600 mAh Rechargeable battery with battery life 20 hours without backlight (or) 9V DC adapter / 230V AC supply operated
Pump Weight (Approx.): 14 kg
PC Interface (optional): RS-485 (2 wire) (Note: connect to PC using USB to RS 485 converter supplied along with PC software)
PC Software (optional): Windows-based semi-automatic calibration software (Optional)
Model: TCAL 1501 / 300
Display: 4.3 inch True TFT LCD Display with Touch screen
Temperature Range : Amb. to 300°C
Resolution: 0.01°C
Stability: ± 0.03°C
Radial uniformity: Better than ± 0.2°C
Measure inputs: RTD-PT 50, 100, PT 1000 / TC - J, K, R, S, T, E, B , N / mA, mV, ohms
Temperature Readout: C
Stabilization Time: 15 minutes
Heating time: 30 mins (25 to 600°C)
Cooling time: 50 mins (600 to 100°C )
Well Dimension: 30 x 150 mm (dia x height)
Test sensor immersion depth: 140 mm
Standard well holes in mm: 5.1, 6.2, 6.2 & 8.1
PC Interface (optional): RS 232 with automatic calibration software
UUC Sensor supply output: 24V DC ± 10% / 50mA max.
Power supply: 230V AC ± 10% / 50Hz (optional 110V AC)
Power Consumption: 1200 VA
Switch test: Provided
Overall Dimension in mm: 285 x 155 x 330 (L x B x H) (Approx.)
Weight: 8.5 kg (without well insert) (Approx.)
Model : TCAL 1503 / -40
Display : 4.3” True colour TFT display with touch screen
Temperature Range : -40 to 120°C @23°C Ambient
Resolution : 0.01 °C
Block Stability : Better than ± 0.03°C at full range
Block Radial Uniformity : ± 0.02°C at full range
Block Axial Uniformity (upto 40mm) : ± 0.18°C at -45°C
± 0.1°C at 0°C
± 0.05°C at 50°C
± 0.11°C at 100°C
± 0.17°C at 120°C
Temperature Read out : °C / °F (selectable)
Loading effect: Better than ± 0.08°C
hysteresis: Better than ± 0.03°C
Cooling time :
30 mins (25 to -45 °C)
15 mins (25 to -30 °C)
65 mins (120 to 25 °C)
Heating time : 25 mins (25 to 120 °C)
75 mins (-45 to 120 °C)
52 mins (-45 to 25 °C)
Stabilization time: 10 minutes
Insert (Dia. x Height): 30 x 160 mm
Test sensor immersion depth: 130 mm
Standard well holes in mm: Insert No. 1 → 5.1, 6.2, 6.2 & 8.1, Insert No. 2 → 6.2, 6.2 & 10.2
Measure inputs: RTD-PT 100, PT 1000 / TC - J, K, R, S, T, E, B , N , Analog – mA, V, mV, ohms
Cold junction Accuracy: ± 0.3°C
UUC Sensor supply input: 24V DC ± 10% / 50mA max.
Power supply: 230V AC ± 10% / 50Hz (optional 110V AC)
Power Consumption: 500 VA
Switch Test : Provided
Overall Dimension in mm: 390 x 185 x 356 (L x B x H) (Approx.)
Weight: 17.3 kg (with well insert) (Approx.)