Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Model: TCAL 1501 / 1200
Display: 4.3” True TFT LCD Display with Touch screen
Temperature Range: 300 to 1200°C
Resolution: 0.1°C
Stability: Better than ± 0.5°C
Radial uniformity: Better than ± 2°C
Stabilization Time: 30 minutes
Temperature readout: °C
Heating time: 50 mins (Amb. to 1200°C)
Cooling time: 120 mins (1200 to 100°C )
Well Dimension: 39 x 180 x 140 mm (dia x height x depth)
Standard well holes in mm: 5.2, 6.2, 6.2, 10.1 & 12.1
Power supply: 230V AC ± 10% / 50Hz (Optional 110V AC)
Power Consumption: 1900 VA
Overall Dimension in mm: 340 x 175 x 425 (L x B x H) (Approx.)
Weight: 18 kg (without well insert) (Approx.)
MODEL : HCAL 1104U - V2
Display : 7” True Colour TFT Touch Screen Display
Control Range* : 5 to 60°C / 3 to 95 % RH*
Dew Point Temperature Range (Psychometric Calculated) : −30°C to 45°C
Psychometric Calculated Indication :
Dew / Frost Point (Dp / Fp), Wet Bulb Temperature (Tw), Vapour Partial Pressure (E), Vapour Saturation Pressure (Ew), Mixing Ratio by Weight (Dry) (g / kg), Enthalpy (H) (KJ / kg), Specific Humidity (Moisture) (g / kg), Absolute Humidity (Moisture) (g / m³), Volume Mixing Ratio (Dry) (ppm)
Calculation Method : WMO Method
Resolution : 0.01 °C / 0.01 % RH
Display Stability : Better than ± 0.03 °C / ± 0.15 % RH
Chamber Stability @ 25°C ** : Temperature ± 0.1°C, Humidity ± 0.3 % RH
Chamber Uniformity @ 25°C ** : Temperature ± 0.2°C, Humidity ± 0.5 % RH
Test Sensor Insert Port : Interchangeable Acrylic Door is provided on front side of the chamber with PG21 gland (cable or sensor size range from 13 to 18 mm) × 3 Nos
External Humidifier Water Tank Capacity : 6 Litres (Approx.) (NOTE : 3 Liter filling is enough for our application)
Humidifier Liquid : Distilled Water
Humidifying Time : 2 % RH / sec (50 to 90 % RH)
Dehumidifying Time : 6 % RH / sec (50 to 10 % RH)
Test Chamber Area : 230 mm DIA × 170 mm D (Approx.)
Power Supply : 230 V AC ± 10 % / 50 Hz (Optional 110 V AC)
Power Consumption : 1000 VA
Construction : Inner Chamber SS 310 / Outer MS Powder Coating
Overall Dimension : 436 mm L × 676 mm W × 368 mm H (Approx.)
Weight : 46 kg (Without Accessories) + 6 kg (Standard Accessories) (Approx.)
The RPMC 1700 Series is high precision Tachometer calibrator, generates true reference rotation per minute (RPM). This calibrator uses “German technology” with high speed motor, high precision encoder and adoption of a new power full 32 bit CPU in control drive, featuring automated gain tuning function, stability, stable stop, rugged in use and many more.
Due to it’s light weight and rugged Aluminium enclosure, it is suitable for in-house and on-site calibration of contact / non contact Tachometer, Tacho coil, Tacho generator, RPM indicator, RPM transmitter, Speedo meter, Proximity sensor, Stroboscope, etc.,.
Model : RPMC 1700 - 3A
Control Range :Contact : 0 to 8000 RPM
Non Contact : 0 to 1,20,000 RPM
Resolution : 0.001 RPM
Display Stability : Contact : ± 0.002 RPM, Non Contact : ± 0.01 RPM
Stability : Contact: ± 0.1 rpm,
Non Contact:
1 Teeth : 6 rpm to 4000 rpm = ± 0.1 rpm
4001 rpm to 8000 rpm = ± 0.2 rpm
5 Teeth : 8001 rpm to 40,000 rpm = better than ± 0.5 rpm
17 Teeth : 40,001 rpm to 1,36,000 rpm = better than ± 0.8 rpm
Accuracy : Contact : 6 rpm to 4000 rpm = ± 0.005% of rdg + 0.1 rpm 4001 rpm to 8000 rpm = ± 0.005% of rdg
Non Contact :
1 Teeth : 6 rpm to 4000 rpm = ± 0.005% of rdg + 0.1 rpm
4001 rpm to 8000 rpm = ± 0.005% of rdg
5 Teeth : 8001 rpm to 40,000 rpm = ± 0.005% of rdg
17 Teeth : 40,001 rpm to 1,36,000 rpm = ± 0.005% of rdg
Display : 7” True colour TFT LCD Display with Touch screen
Stability Time : Within 5 seconds
Within 5 seconds : < 50dB
Noise level : < 50dB
Motor : Ultra stable motor with high resolution Encoder & Drive
Power supply : 230V AC ± 10% / 50Hz (Optional 110V AC)
Power Consumption : 750 VA
Outer Enclosure Construction : Aluminium Anodised
Overall Dimension : 260mm L x 440mm W x 230mm H (Approx.)
Instrument Weight :13 kg(Approx.)
Model: TCAL 1401 / 1200
Display: 0.58” (15mm)(Block) / 0.3”(7.8mm) (Set) 4 digit LCD Display with 4 keys
Temperature Range: 500 to 1200°C
Resolution: 1°C
Stability: ± 2°C
Radial Uniformity: Better than: ± 2°C
Temperature readout: °C
Heating time: 50 mins (Amb. To 1200 °C)
Cooling time: 120 mins (1200 to 100 °C)
Stabilization time: 30 minutes
Well Dimension (dia. X height): 39 x 150 mm
Standard well holes in mm: 5.2, 6.2, 6.2, 10.1 & 12.1
Power supply: 230V AC ± 10% / 50Hz (Optional 110V AC)
Power consumption: 1900 VA
Overall Dimension in mm: 340 x 175 x 425 (L x B x H)(Approx.)
Instrument Weight: 18 kg (without well insert) (Approx.)
Model : TCAL 1401 / 600
Display : 0.58” (15mm) (Block) / 0.3”(7.8mm) (Set) 4 digit LCD Display with 4 keys
Temperature Range : Amb.+5 to 600°C
Resolution : 0.1°C
Stability : ± 0.1°C
Radial Uniformity : Better than ± 1°C
Temperature Read out : °C
Heating time : 30 mins (Amb. To 600 °C)
Cooling time : 25 mins (600 to 100 °C)
Stabilization time : 15 minutes
Well Dimension (dia. X height) :30 x 110 mm
Standard well holes in mm : 4.2, 6.2 , 6.2 & 8.5
Power supply : 230V AC ± 10% / 50Hz (Optional 110V AC)
Power Consumption : 1200 VA
Overall Dimension in mm : 285 x 125 x 275 (L x B x H)(Approx.)
Instrument Weight : 7.5 kg (without well insert) (Approx.)
Model: TCAL 1501 / 600
Display: 4.3 inch True TFT LCD Display with Touch screen
Temperature Range : Amb. +5 to 600°C
Resolution: 0.01°C
Stability: ± 0.05°C
Radial uniformity: Better than ± 0.5°C
Measure inputs: RTD-PT 100, PT 1000 / TC - J, K, R, S, T, E, B , N / mA, mV, ohms
Temperature Readout: C
Stabilization Time: 15 minutes
Heating time: 30 mins (25 to 600°C)
Cooling time: 50 mins (600 to 100°C )
Well Dimension: 30 x 150 mm (dia x height)
Test sensor immersion depth: 140 mm
Standard well holes in mm: 5.1, 6.2, 6.2 & 8.1
PC Interface (optional): RS 232 with automatic calibration software
UUC Sensor supply output: 24V DC ± 10% / 50mA max.
Power supply: 230V AC ± 10% / 50Hz (optional 110V AC)
Power Consumption: 1200 VA
Switch test: Provided
Overall Dimension in mm: 285 x 155 x 330 (L x B x H) (Approx.)
Weight: 8.5 kg (without well insert) (Approx.)
Model: Tcal 1501 / 250
Display: 4.3 inch True TFT LCD Display with Touch screen
Temperature Range: Amb. +5 to 250°C
Resolution: 0.01°C
Stability: ± 0.03°C
Accuracy: Better than ± 0.3°C
Stabilization Time: 45 minutes
Heating time: 60 mins (Amb. to 250°C)
Cooling time: 90 mins (250 to 50°C )
Chamber Dimension: 80 x 140 mm (dia X depth)
Testing area: 60 x 120 mm (dia X depth)
Temperature medium: Silicon oil (200cs recommended)
Measure inputs: RTD-PT 100, PT 1000 / TC-J, K, R, S, T, E, B , N / mA /mV / ohms
PC Interface: RS 485 (optional)
Power supply: 230V AC or 110V AC 50/60Hz
Power Consumption: 1200 VA
Switch test: Provided
Dimension in mm: 340 x 175 x 425 (L x W x H) (Approx.)
Weight (Approx.): 12 kg (without oil)
Model: TCAL 1500 / 1500
Display: 4.3 inch True TFT LCD Display with Touch screen
Temperature Range : 500 to 1500 °C
Resolution: 0.1°C
Stability: ± 0.5°C
Radial uniformity: Better than ± 0.5% of reading
Bath Temperature Control: Digital Temperature Controller with Auto Tune PID Algorithm
Heating time: 3 ½ Hrs ( Amb. to 1500 °C)
Time to Stabilize: 30 minutes
Well Dia: 50 mm
Well Hole Depth: 240 mm
Thermo Well Holes: 6, 8, 10, 14 in mm (Approx)
PC Interface: RS 485 (optional)
Power supply: 230V AC 50/60Hz (Optional 110V AC)
Power Consumption: 3500 VA
Dimension (L x W x H): 250 L X 410 W X 625 + 90 (wheel) H (mm)
Instruments Weight: 57kg (without well insert) (Approx.)
Model : BCAL 1202
Display : 4.3 inch True TFT DISPLAY with touch screen
Temperature Range : 500 to 1200°C
Resolution : 0.1 °C
Stability : ± 0.2 °C
Radial Uniformity : Better than ± 1% of reading
Temperature Read out : °C
Heating time : 60 min (Amb. to 1200 °C)
Cooling time : 120 min (1200 to 100 °C)
Stabilization time : 30 minutes
Aperture area : 25 mm
Emissivity : 0.950
Power supply : 230V AC ± 10% / 50Hz (Optional 110V AC)
Power Consumption : 2200 VA
Overall Dimension in mm : 350 x 352 x 210 (L x B x H)(Approx.)
Instrument Weight : 12 kg(without carrying case)(Approx.)
MODEL BCAL : 502
Display : 4+4 digit 7 segment LED Display
Temperature Range : 50 to 500 °C
Resolution : 0.1°C
Stability : ± 0.2 °C
Uniformity in aperture area: ± 0.5°C@50°C, ± 1.7@250°C , ± 2.5@500°C
Heating Time (to Max) : 40 Minutes
Cooling Time (to Max) : 40 Minutes to 100°C
Aperture area : 25 mm
Emissivity : 0.950
Power Supply : 230V AC ± 10% / 50Hz (Optional 110V AC)
Power Consumption : 500 VA
Instrument Weight : 4.5 kg