Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Model : pH 600 - 1
Display : 4 + 4 Digit 0.5” & 0.39” 7 Seg RED LED Display
Input Impedance : >10 Ohms
Range : -2 to 16 pH
Resolution : 0.01 pH
Temperature sensor: RTD - PT 100 (3 wire)
Temp. Compensation: Manual / Automatic (-20.0 to +150.0ºC)
Electrode Input: Combined Electrode with BNC Attachment
Accuracy : ± 0.01 pH ± 1 digit
Set Point - 1 & 2: Two Set Point with 6 Relay Status Selectable
Relay Output : Relay - 1 for Setpoint - 1, Relay - 2 for Setpoint - 2 with 5A Rating
Relay Hysteresis : 0 to 5 pH (user adjustable)(only for High & Low control modes)
Relay Cyclic delay : 0 to 100 seconds (user adjustable)(only for High & Low control modes)
Alarm Output(optional) inbuilt audible buzzer with front key reset
Optional Re. Tx. output Galvanically Isolated : 4 - 20 mA
Optional Comm. output Isolated RS 485
Comm. Protocol MODBUS RTU
Operating Environment : -10 to 50ºC / 10 to 95 % RH Non Condensing
Power Supply : 90 to 270V AC / DC 50Hz
Dimension : 96 x 96 x 85 mm.
Cutout Dimension : 92 x 92 mm
Weight : 500 grams (Approx.)
Model: TDS 602-1
Display: 4 + 4 Digit 0.5” & 0.39” 7-Segment Red LED Display
Cell Constant*: 0.01 / 0.1 / 1 (user selectable, depends on range)
Range (any one): 1–20 ppm, 5–200 ppm, 10–2000 ppm, 1–20 ppt, 5–200 ppt
Accuracy: ±1% of range +1 digit
Resolution: 0.01 ppm to 0.1 ppt (depends on range)
Temperature Sensor: RTD – PT100 (3-wire)
Temperature Coefficient: 0 to 3% / °C (user adjustable)
Temperature Compensation: Manual / Automatic (-20.0 to +150.0 °C)
Electrode Input: Conductivity cell on rear panel
Set Point – 1 & 2: Two set points with 6 relay status selectable
Relay Output: Relay-1 for Setpoint-1, Relay-2 for Setpoint-2 with 5A rating
Relay Hysteresis: 0 to 500 counts (user adjustable) (only for High & Low control modes)
Relay Cyclic Delay: 0 to 100 seconds (user adjustable) (only for High & Low control modes)
Alarm Output (optional): Inbuilt audible buzzer with front-key reset
Optional Re-Tx Output: Galvanically isolated 4–20 mA
Optional Comm. Output: Isolated RS-485
Communication Protocol: MODBUS RTU
Operating Environment: -10 to 50 °C / 10 to 95% RH non-condensing
Power Supply: 90 to 270 V AC / DC, 50 Hz
Enclosure: ABS plastics
Dimension: 96 × 96 × 85 mm
Cutout Dimension: 92 × 92 mm
Weight: 350 grams (Approx.)
Model: CC 603 - 1
Display: 4 + 4 Digit 0.5” & 0.39” 7 Seg RED LED Display
Range (any one): 1 – 20µS, 5 – 200µS, 10 to 2000µS, 1 to 20mS, 5 to 200mS
Resolution: 0.01µS to 0.1mS (depends on range)
Accuracy: ±1% of range ±1 digit
Cell Constant*: 0.01 / 0.1 / 1 (user selectable, depends on range)
Temperature Sensor: RTD – PT 100 (3 wire)
Temperature Co-efficient: 0 to 3% / °C (user adjustable)
Temperature Compensation: Manual / Automatic (-20.0 to +150.0°C)
Electrode Input: Conductivity cell on rear panel
Set Point – 1 & 2: Two set points with 6 relay status selectable
Relay Output:
Relay-1 for Setpoint-1, Relay-2 for Setpoint-2 with 5A rating
Relay Hysteresis: 0 to 500 counts (user adjustable)
(only for High & Low control modes)
Relay Cyclic Delay: 0 to 100 seconds (user adjustable)
(only for High & Low control modes)
Alarm Output (optional): Inbuilt audible buzzer with front key reset
Optional Re-Tx Output: Galvanically isolated 4 – 20 mA
Optional Comm. Output: Isolated RS-485
Comm. Protocol: MODBUS RTU
Operating Environment: -10 to 50°C / 10 to 95% RH non-condensing
Power Supply: 90 to 270V AC / DC, 50Hz
Dimension: 96 × 96 × 85 mm
Cutout Dimension: 92 × 92 mm
Weight: 350 grams (Approx.)
Model: ORT 601-1
Display: 4 + 4 Digit 0.5” & 0.39” 7-Segment Red LED Display
Range: -1999 to 1999 ORP
Accuracy: ±1 ORP ±1 digit
Resolution: 1 ORP
Electrode Input: Platinum electrode with BNC attachment
Set Point – 1 & 2: Two set points with 6 relay status selectable
Relay Output: Relay-1 for Setpoint-1, Relay-2 for Setpoint-2 with 5A rating
Relay Hysteresis: 0 to 5 ORP (user adjustable) (only for High & Low control modes)
Relay Cyclic Delay: 0 to 100 seconds (user adjustable) (only for High & Low control modes)
Input Impedance: >10¹² ohms
Alarm Output (optional): Inbuilt audible buzzer with front-key reset
Optional Re-Tx Output: Galvanically isolated 4–20 mA
Optional Comm. Output: Isolated RS-485
Communication Protocol: MODBUS RTU
Operating Environment: -10 to 50 °C / 10 to 95% RH non-condensing
Power Supply: 90 to 270 V AC / DC, 50 Hz
Dimension: 96 × 96 × 85 mm
Cutout Dimension: 92 × 92 mm
Weight: 350 grams (Approx.)
Model : TCAL 1503 / -35
Display : 4.3” True colour TFT display with touch screen
Temperature Range : -35 to 120 °C @ 23 °C Ambient
Resolution : 0.01 °C
Block Stability : Better than ± 0.03°C at full range
Block Radial Uniformity : ± 0.02°C at full range
Block Axial Uniformity (upto 40mm) : ± 0.20°C at -35°C
± 0.05°C at 0°C
± 0.05°C at 50°C
± 0.17°C at 100°C
Loading effect: Better than ± 0.08°C
Hysteresis: Better than ± 0.03°C
Heating time: 25 mins (25 to 120 °C)
75 mins (-35 to 120 °C)
52 mins (-35 to 25 °C)
Cooling time: 25 mins (25 to -35 °C)
15 mins (25 to -30 °C)
65 mins (120 to 25 °C)
Stabilization Time : 10 minutes
Test sensor immersion depth: 130 mm
Standard well holes in mm : Insert No. 1 →5.1, 6.2, 6.2 & 8.1, Insert No. 2 →6.2, 6.2 & 10.2
Measure inputs: RTD-PT 100, PT 1000 / TC - J, K, R, S, T, E, B , N , Analog – mA, V, mV, ohms
Cold junction Accuracy: ± 0.3°C
UUC Sensor supply input: 24V DC ± 10% / 50mA max.
Switch Test : Provided
Power supply : 230V AC ± 10% / 50Hz (Optional 110V AC)
Power Consumption : 500 VA
Overall Dimension in mm : 390 x 185 x 356 (L x B x H)(Approx.)
Instrument Weight : 17.3 kg (with well insert)(Approx.)
SANSEL Model BCAL 40, Black body Calibrator is used to measure the accuracy and performance of
non-contact fever detection systems, like medical thermometer & image scanner. Now it is being used in relation to COVID-19 (corona virus). This Blackbody Source meets the demand for a simple cost effective solution but high accurate device for the calibration of thermal imager and IR thermometers that are used at temperature around that of the human body.
Unlike Heat only devices, This model uses a solid state Heat & cool Technology, so that this can be generate both Heat and Cool. This having benefits to maintain the block temperature in different ambient temperature.
BCAL 40 using True colour 3.5” Touch screen display, easy to read multi parameter at the same time like Block temperature, Set temperature, Control status, Output % level, range of the equipment, displays both °C & °F and two Touch screen soft keys are used for settings and one more advantage of help menu to guide the operating Instruction of the equipment. Hence no need of hard copy of Instruction manual.
Model: BCAL 40
Display: 3.5 inch True TFT LCD Display with Touch screen
Temperature Range:
Body mode: 20 to 50°C / 68 to 122°F,
Surface mode: 0 to 100°C / 32 to 212°F
Resolution : 0.01°C
Stability: ± 0.03°C
Uniformity: ± 0.3°C
Stabilization Time: 10 minutes
Temperature readout: °C & °F at a time
Heating time: 10 mins (Amb. To 50°C )
Power supply: 90 to 260V AC/DC / 50/60Hz
Power Consumption: Less than 100 VA
Aperture area: 25mm
Emissivity: 0.950
Overall Dimension: 210 x 210 x 140 (L x B x H)(Approx.)
Instrument Weight: 3.7 kg
Model: TCAL 1501 / 1200
Display: 4.3” True TFT LCD Display with Touch screen
Temperature Range: 300 to 1200°C
Resolution: 0.1°C
Stability: Better than ± 0.5°C
Radial uniformity: Better than ± 2°C
Stabilization Time: 30 minutes
Temperature readout: °C
Heating time: 50 mins (Amb. to 1200°C)
Cooling time: 120 mins (1200 to 100°C )
Well Dimension: 39 x 180 x 140 mm (dia x height x depth)
Standard well holes in mm: 5.2, 6.2, 6.2, 10.1 & 12.1
Power supply: 230V AC ± 10% / 50Hz (Optional 110V AC)
Power Consumption: 1900 VA
Overall Dimension in mm: 340 x 175 x 425 (L x B x H) (Approx.)
Weight: 18 kg (without well insert) (Approx.)
MODEL : HCAL 1104U - V2
Display : 7” True Colour TFT Touch Screen Display
Control Range* : 5 to 60°C / 3 to 95 % RH*
Dew Point Temperature Range (Psychometric Calculated) : −30°C to 45°C
Psychometric Calculated Indication :
Dew / Frost Point (Dp / Fp), Wet Bulb Temperature (Tw), Vapour Partial Pressure (E), Vapour Saturation Pressure (Ew), Mixing Ratio by Weight (Dry) (g / kg), Enthalpy (H) (KJ / kg), Specific Humidity (Moisture) (g / kg), Absolute Humidity (Moisture) (g / m³), Volume Mixing Ratio (Dry) (ppm)
Calculation Method : WMO Method
Resolution : 0.01 °C / 0.01 % RH
Display Stability : Better than ± 0.03 °C / ± 0.15 % RH
Chamber Stability @ 25°C ** : Temperature ± 0.1°C, Humidity ± 0.3 % RH
Chamber Uniformity @ 25°C ** : Temperature ± 0.2°C, Humidity ± 0.5 % RH
Test Sensor Insert Port : Interchangeable Acrylic Door is provided on front side of the chamber with PG21 gland (cable or sensor size range from 13 to 18 mm) × 3 Nos
External Humidifier Water Tank Capacity : 6 Litres (Approx.) (NOTE : 3 Liter filling is enough for our application)
Humidifier Liquid : Distilled Water
Humidifying Time : 2 % RH / sec (50 to 90 % RH)
Dehumidifying Time : 6 % RH / sec (50 to 10 % RH)
Test Chamber Area : 230 mm DIA × 170 mm D (Approx.)
Power Supply : 230 V AC ± 10 % / 50 Hz (Optional 110 V AC)
Power Consumption : 1000 VA
Construction : Inner Chamber SS 310 / Outer MS Powder Coating
Overall Dimension : 436 mm L × 676 mm W × 368 mm H (Approx.)
Weight : 46 kg (Without Accessories) + 6 kg (Standard Accessories) (Approx.)
The RPMC 1700 Series is high precision Tachometer calibrator, generates true reference rotation per minute (RPM). This calibrator uses “German technology” with high speed motor, high precision encoder and adoption of a new power full 32 bit CPU in control drive, featuring automated gain tuning function, stability, stable stop, rugged in use and many more.
Due to it’s light weight and rugged Aluminium enclosure, it is suitable for in-house and on-site calibration of contact / non contact Tachometer, Tacho coil, Tacho generator, RPM indicator, RPM transmitter, Speedo meter, Proximity sensor, Stroboscope, etc.,.
Model : RPMC 1700 - 3A
Control Range :Contact : 0 to 8000 RPM
Non Contact : 0 to 1,20,000 RPM
Resolution : 0.001 RPM
Display Stability : Contact : ± 0.002 RPM, Non Contact : ± 0.01 RPM
Stability : Contact: ± 0.1 rpm,
Non Contact:
1 Teeth : 6 rpm to 4000 rpm = ± 0.1 rpm
4001 rpm to 8000 rpm = ± 0.2 rpm
5 Teeth : 8001 rpm to 40,000 rpm = better than ± 0.5 rpm
17 Teeth : 40,001 rpm to 1,36,000 rpm = better than ± 0.8 rpm
Accuracy : Contact : 6 rpm to 4000 rpm = ± 0.005% of rdg + 0.1 rpm 4001 rpm to 8000 rpm = ± 0.005% of rdg
Non Contact :
1 Teeth : 6 rpm to 4000 rpm = ± 0.005% of rdg + 0.1 rpm
4001 rpm to 8000 rpm = ± 0.005% of rdg
5 Teeth : 8001 rpm to 40,000 rpm = ± 0.005% of rdg
17 Teeth : 40,001 rpm to 1,36,000 rpm = ± 0.005% of rdg
Display : 7” True colour TFT LCD Display with Touch screen
Stability Time : Within 5 seconds
Within 5 seconds : < 50dB
Noise level : < 50dB
Motor : Ultra stable motor with high resolution Encoder & Drive
Power supply : 230V AC ± 10% / 50Hz (Optional 110V AC)
Power Consumption : 750 VA
Outer Enclosure Construction : Aluminium Anodised
Overall Dimension : 260mm L x 440mm W x 230mm H (Approx.)
Instrument Weight :13 kg(Approx.)