Products

Model: MTC-01 Type: R, S Temperature Range: (a) 200 to 1500°C (b) 100 to 1200°C Accuracy: Class 1 (0.6°C or 0.1% of Temperature which ever is greater) Temperature Scale: ITS-90 Sheath Material: K-99 grade ceramic Thermocouple wire dia: 0.5mm Probe dia & Length: 6mm OD & 450mm Length Cable Length: 1.5 meter long with male female, Miniature Omega connector Handle Dimension: 20mm OD & 100mm Length Calibration Certified: ISO/IEC 17025 Accredited 5 point

“SANSEL” Series BCAL 1502 is a Micro controller Based Precision Temperature Calibrators Generates True Reference Temperature. The Temperature Controller of the Calibrators Uses a Auto Tune PID Control Algorithm. Infra red thermometer & online pyrometer calibration is performed by comparison of the temperature measured by UUC and target temperature indicated by the calibrator or using standard pyrometer. Focus the Unit Under Calibration (UUC) to be Calibrate to the target point given in BCAL 1502. Set the Temperature from the Touch screen display. Both True and set Temperature can be read. When Stabilization Occurs, Simply Read the Temperature and re-Calibrate the UUC. Model: BCAL 1502 Display: 4.3 inch True TFT LCD Display with Touch screen Temperature Range: 500 to 1500 °C Resolution: 0.1°C Stability: ± 1°C Radial Uniformity: ± 1% of reading Bath Temperature Control: Digital Temperature Controller with Auto Tune PID Algorithm Temperature readout: °C Aperture area: 30mm Emissivity: 0.950 Power supply: 230V AC ± 10% / 50Hz (Optional 110V AC) Power Consumption: 4 KVA Dimension (W*D*H) (Approx.): 580mm W x 450mm D x 390mm H Instrument Weight (Approx): 45 kg

Model: DTJ 71 A (4” DISPLAY) & DTJ 71 B (8”DISPLAY) Display: 4 Digit 4” & 8” Red 7 seg LED ( 1” & 2” on request) Range: 99.59, 999.9, 9999 secs / mins / hrs (programmable) Resolution: 0.01 sec / min / hrs External Input: START / HOLD / RESET (potential free contact inputs) Relay output: 2 NO, 2 NC 5 A Rated relay Power Supply: 230V AC / 50Hz Working temperature: 0 – 50°C

Model: TCAL 1501 / 300 Display: 4.3 inch True TFT LCD Display with Touch screen Temperature Range : Amb. to 300°C Resolution: 0.01°C Stability: ± 0.03°C Radial uniformity: Better than ± 0.2°C Measure inputs: RTD-PT 50, 100, PT 1000 / TC - J, K, R, S, T, E, B , N / mA, mV, ohms Temperature Readout: C Stabilization Time: 15 minutes Heating time: 30 mins (25 to 600°C) Cooling time: 50 mins (600 to 100°C ) Well Dimension: 30 x 150 mm (dia x height) Test sensor immersion depth: 140 mm Standard well holes in mm: 5.1, 6.2, 6.2 & 8.1 PC Interface (optional): RS 232 with automatic calibration software UUC Sensor supply output: 24V DC ± 10% / 50mA max. Power supply: 230V AC ± 10% / 50Hz (optional 110V AC) Power Consumption: 1200 VA Switch test: Provided Overall Dimension in mm: 285 x 155 x 330 (L x B x H) (Approx.) Weight: 8.5 kg (without well insert) (Approx.)

Model: Tcal 1501 / -80 Display: 4.3 inch true TFT display with touch screen Working Range: -80 to -40 °C Resolution: 0.01 °C Stability: ± 0.03 °C Uniformity: ± 0.2 °C Bath Temperature Control: Digital Temperature Controller with FUZZY PID Multi Hole Well: Provided for Different type of Sensors, Sensor with Indicator & Thermometer Calibration Cooling medium: IPA Liquid Capacity: 5 Liters Testing Area: 100mm W x 100mm H x 190mm D Over all Dimension: 705mm L x 505mm W x 825mm H Power Supply: 230V AC ± 10% / 50Hz (Optional 110V44 AC) Weight: 80 kg (approx.)

Model : DL 96 / DL 97 No. of Channel : 8 or 16 or 32 Channel Sampling Rate : 100 msec (per channel) Memory : 20000 Readings (per channel) Data Download : USB Pen Drive / PC / Dot Matrix Printer Operating Voltage : 100–240 VAC @ 50 / 60 Hz Bezel Dimension DL 96 : 100 (H) × 110 (W) mm Bezel Dimension DL 97 : 195 (H) × 295 (W) mm Cut-out Size DL 96 : 92 (H) × 92 (W) mm Cut-out Size DL 97 : 175 (H) × 255 (W) mm Unit Dimension DL 96 : 100 (H) × 110 (W) × 150 (D) mm Unit Dimension DL 97 : 195 (H) × 295 (W) × 80 (D) mm Display DL 96 : 3.5 inch Multi-Color Active Matrix Touch Screen Display Display DL 97 : 8 inch Multi-Color Active Matrix Touch Screen Display Input Pt100 : −199.9 ~ 300.0 °C, Accuracy ±0.5 °C Input K : −100 ~ 1200 °C, Accuracy ±1.2 °C Input J : −100 ~ 1000 °C, Accuracy ±1.2 °C Input N : −100 ~ 1300 °C, Accuracy ±1.2 °C Input T : −100.0 ~ 400.0 °C, Accuracy ±0.8 °C Input S : 0 ~ 1500 °C, Accuracy ±3 °C Input R : 0 ~ 1500 °C, Accuracy ±3 °C Input 0–20 mA : −1999 ~ 9999, Accuracy ±0.15% FS Input 4–20 mA : −1999 ~ 9999, Accuracy ±0.15% FS Input 0–1 V : −1999 ~ 9999, Accuracy ±0.15% FS Input 0–10 V : −1999 ~ 9999, Accuracy ±0.15% FS Weight DL 96 : 0.800 Kg Weight DL 97 : 1.5 Kg

Model: PCAL 1300 / 30 bar Range (bar): -0.9 to 30 bar Pressure media: Air Pressure pump: PVP – 02 Display: 128 × 64 COG Graphic LCD with White LED Backlight Instrument port (at pump): 3/8“ BSP Female Test Port (at pump): ¼” BSP Female Pump dimension in mm (Approx.): 230 × 140 × 65 mm (L × B × H) Resolution (bar): 6 digit user selectable Instrument Port: 3/8” BSP Male Instrument dimension: 100 × 100 × 55 (W × H × D) mm Instrument Weight: 400gms (Approx.) Stability time: 1 to 2 mins Accuracy: ± 0.05% FS Pressure units * (selectable): bar, mbar, MPa, kPa, Pa, PSI, kg/cm², inHg, cmHg, mmHg, mH₂O, ftH₂O, inH₂O, cmH₂O, mmH₂O Pressure Zero: One touch zero provided on front key Pressure Peak: Maximum & minimum with user reset option Pressure overflow: FS X 2 (Max.) Pressure burst: FS X 3 (Max.) Temp.Measure: RTD -PT 100 (2,3,4, wire selectable) Temp. Range: -199.999 to 850.000 mA Measure: 0-24 mA (scalable) Display scale: -99999 to 99999 counts (for mA measure input) Switch test: Provided Display hold: One touch hold provided on front key Power Supply: 9V DC ±5% / 600 mAh Rechargeable battery with battery life 20 hours without backlight (or) 9V DC adapter / 230V AC supply operated PC Interface (optional): RS-485 (2 wire) (Note: connect to PC using USB to RS 485 converter supplied along with PC software) PC Software (optional): Windows-based semi-automatic calibration software (Optional) Pump weight (gms) (Approx.): 750 gms

Model: Pcal 1300 / 350 bar Range (bar): 0 to 350 bar Pressure media: Oil & Water Pressure pump: HPP – 01 Display: 128 × 64 COG Graphic LCD with White LED Backlight Test Port (at pump): ¼” BSP Female Instrument port (at pump): 3/8” BSP Female Instrument Port: 3/8” BSP Male Pump dimension in mm (Approx.): 240 × 185 × 95 mm (H × W × D) Resolution (bar): 6 digit user selectable Instrument dimension: 100 × 100 × 55 (W × H × D) mm Instrument Weight: 400 gms (Approx.) Stability time: 1 to 2 mins Accuracy: ± 0.05% FS Pressure units * (selectable): bar, mbar, MPa, kPa, Pa, PSI, kg/cm², inHg, cmHg, mmHg, cmH₂O, mmH₂O Pressure Zero: One touch zero provided on front key Pressure Peak: Maximum & minimum with user reset option Pressure overflow: FS X 2 (Max.) Pressure burst: FS X 3 (Max.) Temp.Measure: RTD - PT 100 (2,3,4, wire selectable) Temp. Range: -199.999 to 850.000 mA Measure: 0-24 mA (scalable) Display scale: -99999 to 99999 counts (for mA measure input) Switch test: Provided Display Hold: One touch hold provided on front key Power Supply: 9V DC ±5% / 600 mAh Rechargeable battery with battery life 20 hours without backlight (or) 9V DC adapter / 230V AC supply operated Pump Weight (gms) (Approx.): 1.26 kg Switch test: Provided Display Hold: One touch hold provided on front key PC Interface (optional): RS-485 (2 wire) (Note: connect to PC using USB to RS 485 converter supplied along with PC software) PC Software (optional): Windows-based semi-automatic calibration software (optional)

Model: Pcal 1300 / 1000 bar Range (bar): 0 to 1000 bar Pressure media: Oil & Water Pressure pump: CT – 02 Display: 128 × 64 COG Graphic LCD with White LED Backlight Resolution (bar): 6 digit user selectable Instrument Port: ½” BSP Male x 10 mm long Instrument dimension: 100 × 100 × 55 (W × H × D) mm Instrument Weight: 400 gms (Approx.) Stability time: 1 to 2 mins Accuracy: ± 0.05% FS PSI: 17400 Psi Over pressure: 120% Pressure units * (selectable): bar, mbar, MPa, kPa, Pa, PSI, kg/cm², inHg, cmHg, mmHg, mH₂O, ftH₂O, inH₂O, cmH₂O, mmH₂O Pressure Zero: One touch zero provided on front key Pressure Peak: Maximum & minimum with user reset option Pressure overflow: FS X 2 (Max.) Pressure burst: FS X 3 (Max.) Temp.Measure: RTD - PT 100 (2,3,4, wire selectable) Temp. Range: -199.999 to 850.000 mA Measure: 0-24 mA (scalable) Display scale: -99999 to 99999 counts (for mA measure input) Switch test: Provided Display Hold: One touch hold provided on front key Power Supply: 9V DC ±5% / 600 mAh Rechargeable battery with battery life 20 hours without backlight (or) 9V DC adapter / 230V AC supply operated Pump Weight (Approx.): 14 kg PC Interface (optional): RS-485 (2 wire) (Note: connect to PC using USB to RS 485 converter supplied along with PC software) PC Software (optional): Windows-based semi-automatic calibration software (Optional)

Model : PCAL 1300 / 2 bar Range (bar) : −0.9 to 2 bar Pressure Media : Air Pressure Pump : PVP – 01, 02 Display : 128 × 64 COG Graphic LCD with White LED Back Light Instrument Port (at Pump) : 3/8” BSP Female Test Port (at Pump) : ¼” BSP Female Instrument Port : 3/8” BSP Male Pump Dimension in mm (Approx.) : PVP – 01 (230 × 220 × 70 mm (H × W × D)), PVP – 02 (230 × 140 × 65 mm (L × B × H)) Resolution (bar) : 6 Digit User Selectable Instrument Port (Extended) : ¼” BSP Male × 10 mm Long Instrument Dimension : 100 × 100 × 55 (W × H × D) mm Instrument Weight : 400 gms (Approx.) Stability Time : 1 to 2 mins Accuracy : ± 0.05% FS Pressure Units (Selectable)* : bar, mbar, MPa, kPa, Pa, PSI, kg/cm², inHg, cmHg, mmHg, mH₂O, ftH₂O, inH₂O, cmH₂O, mmH₂O Pressure Zero : One Touch Zero Provided on Front Key Pressure Peak : Maximum & Minimum with User Reset Option Pressure Overflow : FS × 2 (Max.) Pressure Burst : FS × 3 (Max.) Temperature Measure : RTD – PT100 (2, 3, 4 Wire Selectable) Temperature Range : −199.999 to 850.000 mA Measure : 0–24 mA (Scalable) Display Scale : −99999 to 99999 Counts (for mA Measure Input) Switch Test : Provided Display Hold : One Touch Hold Provided on Front Key Power Supply : 9 V DC ±5% / 600 mAh Rechargeable Battery with Battery Life 20 Hours without Backlight (or) 9 V DC Adapter / 230 V AC Supply Operated Pump Weight (gms) (Approx.) : PVP – 01 (1.1 kg), PVP – 02 (750 gms) PC Interface (Optional) : RS-485 (2 Wire) (Note: Connect to PC using USB to RS-485 Converter Supplied along with PC Software) PC Software (Optional) : Windows Based Semi-Automatic Calibration Software (Optional)

Model : PCAL 1300 / 1 (Pneumatic) Display : 128 × 64 COG Graphic LCD with White LED Back Light Range (bar) : −0.9 to 1 bar Pressure Media : Air Resolution (bar) : 6 Digit User Selectable Accuracy : ± 0.05% FS Pressure Pump : PVP – 01 Instrument Port (at Pump) : 3/8” BSP Female Test Port (at Pump) : ¼” BSP Female Instrument Port : 3/8” BSP Male Pump Dimension in mm (Approx.) : 230 × 220 × 70 (H × W × D) Instrument Dimension in mm : 100 × 100 × 55 (W × H × D) Instrument Weight : 400 gms (Approx.) Stability Time : 1 to 2 mins Pressure Units (Selectable)* : bar, mbar, MPa, kPa, Pa, PSI, kg/cm², inHg, cmHg, mmHg, mH₂O, ftH₂O, inH₂O, cmH₂O, mmH₂O Pressure Zero : One Touch Zero Provided on Front Key Pressure Peak : Maximum & Minimum with User Reset Option Pressure Overflow : FS × 2 (Max.) Pressure Burst : FS × 3 (Max.) Temperature Measure : RTD – PT100 (2, 3, 4 Wire Selectable) Temperature Range : −199.999 to 850.000 mA Measure : 0–24 mA (Scalable) Display Scale : −99999 to 99999 Counts (for mA Measure Input) Switch Test : Provided Display Hold : One Touch Hold Provided on Front Key Power Supply : 9 V DC ±5% / 600 mAh Rechargeable Battery with Battery Life 20 Hours without Backlight (or) 9 V DC Adapter / 230 V AC Supply Operated PC Interface (Optional) : RS-485 (2 Wire) (Note: Connect to PC using USB to RS-485 Converter Supplied along with PC Software) PC Software (Optional) : Windows Based Semi-Automatic Calibration Software (Optional)

Model: Pcal 1300 / ± 350 mbar Range (bar): ± 350 mbar Pressure media: Air Pressure pump: PVP – 01 Display: 128 × 64 COG Graphic LCD with White LED Backlight Test Port (at pump): ¼” BSP Female Instrument port (at pump): 3/8” BSP Female Instrument Port: 3/8” BSP Male Pump dimension in mm (Approx.): 230 × 220 × 70 mm (H × W × D) Resolution (bar): 6 digit user selectable Instrument dimension: 100 × 100 × 55 (W × H × D) mm Instrument Weight: 400 gms (Approx.) Stability time: 1 to 2 mins Accuracy: ± 0.05% FS Pressure units * (selectable): bar, mbar, MPa, kPa, Pa, PSI, kg/cm², inHg, cmHg, mmHg, cmH₂O, mmH₂O Pressure Zero: One touch zero provided on front key Pressure Peak: Maximum & minimum with user reset option Pressure overflow: FS X 2 (Max.) Pressure burst: FS X 3 (Max.) Temp.Measure: RTD - PT 100 (2,3,4, wire selectable) Temp. Range: -199.999 to 850.000 mA Measure: 0-24 mA (scalable) Display scale: -99999 to 99999 counts (for mA measure input) Switch test: Provided Display Hold: One touch hold provided on front key Power Supply: 9V DC ±5% / 600 mAh Rechargeable battery with battery life 20 hours without backlight (or) 9V DC adapter / 230V AC supply operated Pump Weight (gms) (Approx.): 1.1 kg PC Interface (optional): RS-485 (2 wire) (Note: connect to PC using USB to RS 485 converter supplied along with PC software) PC Software (optional): Windows-based semi-automatic calibration software (optional)