Products

Model: Pcal 1300 / 350 bar Range (bar): 0 to 350 bar Pressure media: Oil & Water Pressure pump: HPP – 01 Display: 128 × 64 COG Graphic LCD with White LED Backlight Test Port (at pump): ¼” BSP Female Instrument port (at pump): 3/8” BSP Female Instrument Port: 3/8” BSP Male Pump dimension in mm (Approx.): 240 × 185 × 95 mm (H × W × D) Resolution (bar): 6 digit user selectable Instrument dimension: 100 × 100 × 55 (W × H × D) mm Instrument Weight: 400 gms (Approx.) Stability time: 1 to 2 mins Accuracy: ± 0.05% FS Pressure units * (selectable): bar, mbar, MPa, kPa, Pa, PSI, kg/cm², inHg, cmHg, mmHg, cmH₂O, mmH₂O Pressure Zero: One touch zero provided on front key Pressure Peak: Maximum & minimum with user reset option Pressure overflow: FS X 2 (Max.) Pressure burst: FS X 3 (Max.) Temp.Measure: RTD - PT 100 (2,3,4, wire selectable) Temp. Range: -199.999 to 850.000 mA Measure: 0-24 mA (scalable) Display scale: -99999 to 99999 counts (for mA measure input) Switch test: Provided Display Hold: One touch hold provided on front key Power Supply: 9V DC ±5% / 600 mAh Rechargeable battery with battery life 20 hours without backlight (or) 9V DC adapter / 230V AC supply operated Pump Weight (gms) (Approx.): 1.26 kg Switch test: Provided Display Hold: One touch hold provided on front key PC Interface (optional): RS-485 (2 wire) (Note: connect to PC using USB to RS 485 converter supplied along with PC software) PC Software (optional): Windows-based semi-automatic calibration software (optional)

Model: Pcal 1300 / 1000 bar Range (bar): 0 to 1000 bar Pressure media: Oil & Water Pressure pump: CT – 02 Display: 128 × 64 COG Graphic LCD with White LED Backlight Resolution (bar): 6 digit user selectable Instrument Port: ½” BSP Male x 10 mm long Instrument dimension: 100 × 100 × 55 (W × H × D) mm Instrument Weight: 400 gms (Approx.) Stability time: 1 to 2 mins Accuracy: ± 0.05% FS PSI: 17400 Psi Over pressure: 120% Pressure units * (selectable): bar, mbar, MPa, kPa, Pa, PSI, kg/cm², inHg, cmHg, mmHg, mH₂O, ftH₂O, inH₂O, cmH₂O, mmH₂O Pressure Zero: One touch zero provided on front key Pressure Peak: Maximum & minimum with user reset option Pressure overflow: FS X 2 (Max.) Pressure burst: FS X 3 (Max.) Temp.Measure: RTD - PT 100 (2,3,4, wire selectable) Temp. Range: -199.999 to 850.000 mA Measure: 0-24 mA (scalable) Display scale: -99999 to 99999 counts (for mA measure input) Switch test: Provided Display Hold: One touch hold provided on front key Power Supply: 9V DC ±5% / 600 mAh Rechargeable battery with battery life 20 hours without backlight (or) 9V DC adapter / 230V AC supply operated Pump Weight (Approx.): 14 kg PC Interface (optional): RS-485 (2 wire) (Note: connect to PC using USB to RS 485 converter supplied along with PC software) PC Software (optional): Windows-based semi-automatic calibration software (Optional)

Model : PCAL 1300 / 2 bar Range (bar) : −0.9 to 2 bar Pressure Media : Air Pressure Pump : PVP – 01, 02 Display : 128 × 64 COG Graphic LCD with White LED Back Light Instrument Port (at Pump) : 3/8” BSP Female Test Port (at Pump) : ¼” BSP Female Instrument Port : 3/8” BSP Male Pump Dimension in mm (Approx.) : PVP – 01 (230 × 220 × 70 mm (H × W × D)), PVP – 02 (230 × 140 × 65 mm (L × B × H)) Resolution (bar) : 6 Digit User Selectable Instrument Port (Extended) : ¼” BSP Male × 10 mm Long Instrument Dimension : 100 × 100 × 55 (W × H × D) mm Instrument Weight : 400 gms (Approx.) Stability Time : 1 to 2 mins Accuracy : ± 0.05% FS Pressure Units (Selectable)* : bar, mbar, MPa, kPa, Pa, PSI, kg/cm², inHg, cmHg, mmHg, mH₂O, ftH₂O, inH₂O, cmH₂O, mmH₂O Pressure Zero : One Touch Zero Provided on Front Key Pressure Peak : Maximum & Minimum with User Reset Option Pressure Overflow : FS × 2 (Max.) Pressure Burst : FS × 3 (Max.) Temperature Measure : RTD – PT100 (2, 3, 4 Wire Selectable) Temperature Range : −199.999 to 850.000 mA Measure : 0–24 mA (Scalable) Display Scale : −99999 to 99999 Counts (for mA Measure Input) Switch Test : Provided Display Hold : One Touch Hold Provided on Front Key Power Supply : 9 V DC ±5% / 600 mAh Rechargeable Battery with Battery Life 20 Hours without Backlight (or) 9 V DC Adapter / 230 V AC Supply Operated Pump Weight (gms) (Approx.) : PVP – 01 (1.1 kg), PVP – 02 (750 gms) PC Interface (Optional) : RS-485 (2 Wire) (Note: Connect to PC using USB to RS-485 Converter Supplied along with PC Software) PC Software (Optional) : Windows Based Semi-Automatic Calibration Software (Optional)

Model : PCAL 1300 / 1 (Pneumatic) Display : 128 × 64 COG Graphic LCD with White LED Back Light Range (bar) : −0.9 to 1 bar Pressure Media : Air Resolution (bar) : 6 Digit User Selectable Accuracy : ± 0.05% FS Pressure Pump : PVP – 01 Instrument Port (at Pump) : 3/8” BSP Female Test Port (at Pump) : ¼” BSP Female Instrument Port : 3/8” BSP Male Pump Dimension in mm (Approx.) : 230 × 220 × 70 (H × W × D) Instrument Dimension in mm : 100 × 100 × 55 (W × H × D) Instrument Weight : 400 gms (Approx.) Stability Time : 1 to 2 mins Pressure Units (Selectable)* : bar, mbar, MPa, kPa, Pa, PSI, kg/cm², inHg, cmHg, mmHg, mH₂O, ftH₂O, inH₂O, cmH₂O, mmH₂O Pressure Zero : One Touch Zero Provided on Front Key Pressure Peak : Maximum & Minimum with User Reset Option Pressure Overflow : FS × 2 (Max.) Pressure Burst : FS × 3 (Max.) Temperature Measure : RTD – PT100 (2, 3, 4 Wire Selectable) Temperature Range : −199.999 to 850.000 mA Measure : 0–24 mA (Scalable) Display Scale : −99999 to 99999 Counts (for mA Measure Input) Switch Test : Provided Display Hold : One Touch Hold Provided on Front Key Power Supply : 9 V DC ±5% / 600 mAh Rechargeable Battery with Battery Life 20 Hours without Backlight (or) 9 V DC Adapter / 230 V AC Supply Operated PC Interface (Optional) : RS-485 (2 Wire) (Note: Connect to PC using USB to RS-485 Converter Supplied along with PC Software) PC Software (Optional) : Windows Based Semi-Automatic Calibration Software (Optional)

Model: Pcal 1300 / ± 350 mbar Range (bar): ± 350 mbar Pressure media: Air Pressure pump: PVP – 01 Display: 128 × 64 COG Graphic LCD with White LED Backlight Test Port (at pump): ¼” BSP Female Instrument port (at pump): 3/8” BSP Female Instrument Port: 3/8” BSP Male Pump dimension in mm (Approx.): 230 × 220 × 70 mm (H × W × D) Resolution (bar): 6 digit user selectable Instrument dimension: 100 × 100 × 55 (W × H × D) mm Instrument Weight: 400 gms (Approx.) Stability time: 1 to 2 mins Accuracy: ± 0.05% FS Pressure units * (selectable): bar, mbar, MPa, kPa, Pa, PSI, kg/cm², inHg, cmHg, mmHg, cmH₂O, mmH₂O Pressure Zero: One touch zero provided on front key Pressure Peak: Maximum & minimum with user reset option Pressure overflow: FS X 2 (Max.) Pressure burst: FS X 3 (Max.) Temp.Measure: RTD - PT 100 (2,3,4, wire selectable) Temp. Range: -199.999 to 850.000 mA Measure: 0-24 mA (scalable) Display scale: -99999 to 99999 counts (for mA measure input) Switch test: Provided Display Hold: One touch hold provided on front key Power Supply: 9V DC ±5% / 600 mAh Rechargeable battery with battery life 20 hours without backlight (or) 9V DC adapter / 230V AC supply operated Pump Weight (gms) (Approx.): 1.1 kg PC Interface (optional): RS-485 (2 wire) (Note: connect to PC using USB to RS 485 converter supplied along with PC software) PC Software (optional): Windows-based semi-automatic calibration software (optional)

Model: TCAL 1401/ - 30 Display: 0.58” (15mm)(Block) / 0.3”(7.8mm) (Set) 4 digit LCD Display with 4 keys Temperature Range: -30 to 100°C (*@Ambient 25°C) Radial Uniformity: Better than 0.15°C Resolution: 0.1°C Stability: ± 0.1°C Temperature readout: °C Heating time: 20 mins (Amb. To 100 °C) Cooling time: 25 mins (25 to -30 °C) Stabilization time: 10 minutes Well Dimension (dia. X height): 22 x 120 mm Standard well holes in mm: 5.2, 6.2 & 6.2 Power supply: 230V AC ± 10% / 50Hz (Optional 110V AC) Power consumption: 500 VA Overall Dimension in mm: 490 x 178 x 357 (L x B x H)(Approx.) Instrument Weight: 12.5 kg (without well insert) (Approx.)

Model: TDS 100 Display: 0.5” 3 ½ Digit 7 segment Red LED Range: 0 – 20 ppm/ 200 ppm/ 2000 ppm/ 20ppt / 200ppt ( 5 range selection using front rotary switch ) Resolution: 0.01 / 0.1 / 1 for ppm range & 0.01 / 0.1 for ppt range Accuracy: ± 1 % of Range ± 1 digit Temperature Compensation: 0 to 50°C (Manual) continuously adjustable Cell Constant: Adjustable with indication on display Sensor: Platinum Conductivity cell (1.0 cell constant) with Banana male connector Input Connection: Banana socket Operating Environment: 0 to 50 °C / 20 to 95 % RH non condensing Power supply: 230V AC / 50 Hz ± 10% Overall Dimensions in mm: 185 x 235 x 65 ( L x B x H ) Instrument weight: 1.6 kg (Approx.)

Model: pH 302 Display: 16 Character x 2 line LCD with Backlight Range: 0 to 14 pH / -1999 to +1999 mV /0 – 150°C Resolution: 0.01 pH / 1 mV / 0.1°C Accuracy: ± 0.01 pH ± 1 digit / ± 1 mV ± 1 digit /± 0.5°C ± 1 digit Input Impedance: > 10¹² Ohms Temperature Compensation: 0 to 150°C Manual / Automatic Electrode: Combined pH Electrode with BNC attachment Temperature sensor: Provided with 3 pin female socket pH / ORP Input connection: BNC socket Operating Environment: 0 to 50 °C / 20 to 95 % RH non condensing Temperature connection: 3 pin male socket Power supply: 230V AC / 50 Hz ± 10% Overall Dimensions in mm: 190 x 185 x 75 ( L x B x H ) Instrument weight: 1.7 kg (Approx.)

Model: TDSI 642 Display: 3½ digit 0.5” seven segment LED display TDS range: 0–20 ppm / 0–200 ppm / 0–2000 ppm / 0–20 ppt / 0–200 ppt (any one) Conductivity range: 0–20 µS / 0–200 µS / 0–2000 µS / 0–20 mS / 0–200 mS Calibration: Zero and Span provided on front panel Accuracy: ±1% FS + 1 digit Resolution: Minimum 0.01 ppm depending on range Cell constant: 0.1 or 1 as per range Input connection: Terminal Operating temperature: 0–50°C Operating humidity: 20–95% RH non-condensing Power supply: 90–270 V AC 50 Hz Dimensions: 48 × 96 × 65 mm Cut-out dimensions: 44 × 92 mm Weight: 170 grams

Model: pH 300 Display: 0.5” 3 ½ Digit 7 segment Red LED Range: 0 to 14 pH / -1999 to +1999 mV Resolution: 0.01 pH / 1 mV Accuracy: ± 0.05 pH ± 1 digit / ± 1 mV ± 1 digit Input Impedance: > 10¹² Ohms Input connection: BNC socket Electrode: Combined Electrode with BNC attachment Temperature Compensation: 0 to 50°C (Manual) continuously adjustable Operating Environment: 0 to 50 °C / 20 to 95 % RH non condensing Power supply: 230V AC / 50 Hz ± 10% Overall Dimensions in mm: 185 x 235 x 65 (L x B x H) Instrument weight: 1.6 kg (Approx.)

MODEL : HCAL 1104U - V2 Display : 7” True Colour TFT Touch Screen Display Control Range* : 5 to 60°C / 3 to 95 % RH* Dew Point Temperature Range (Psychometric Calculated) : −30°C to 45°C Psychometric Calculated Indication : Dew / Frost Point (Dp / Fp), Wet Bulb Temperature (Tw), Vapour Partial Pressure (E), Vapour Saturation Pressure (Ew), Mixing Ratio by Weight (Dry) (g / kg), Enthalpy (H) (KJ / kg), Specific Humidity (Moisture) (g / kg), Absolute Humidity (Moisture) (g / m³), Volume Mixing Ratio (Dry) (ppm) Calculation Method : WMO Method Resolution : 0.01 °C / 0.01 % RH Display Stability : Better than ± 0.03 °C / ± 0.15 % RH Chamber Stability @ 25°C ** : Temperature ± 0.1°C, Humidity ± 0.3 % RH Chamber Uniformity @ 25°C ** : Temperature ± 0.2°C, Humidity ± 0.5 % RH Test Sensor Insert Port : Interchangeable Acrylic Door is provided on front side of the chamber with PG21 gland (cable or sensor size range from 13 to 18 mm) × 3 Nos External Humidifier Water Tank Capacity : 6 Litres (Approx.) (NOTE : 3 Liter filling is enough for our application) Humidifier Liquid : Distilled Water Humidifying Time : 2 % RH / sec (50 to 90 % RH) Dehumidifying Time : 6 % RH / sec (50 to 10 % RH) Test Chamber Area : 230 mm DIA × 170 mm D (Approx.) Power Supply : 230 V AC ± 10 % / 50 Hz (Optional 110 V AC) Power Consumption : 1000 VA Construction : Inner Chamber SS 310 / Outer MS Powder Coating Overall Dimension : 436 mm L × 676 mm W × 368 mm H (Approx.) Weight : 46 kg (Without Accessories) + 6 kg (Standard Accessories) (Approx.)

The RPMC 1700 Series is high precision Tachometer calibrator, generates true reference rotation per minute (RPM). This calibrator uses “German technology” with high speed motor, high precision encoder and adoption of a new power full 32 bit CPU in control drive, featuring automated gain tuning function, stability, stable stop, rugged in use and many more. Due to it’s light weight and rugged Aluminium enclosure, it is suitable for in-house and on-site calibration of contact / non contact Tachometer, Tacho coil, Tacho generator, RPM indicator, RPM transmitter, Speedo meter, Proximity sensor, Stroboscope, etc.,. Model : RPMC 1700 - 3A Control Range :Contact : 0 to 8000 RPM Non Contact : 0 to 1,20,000 RPM Resolution : 0.001 RPM Display Stability : Contact : ± 0.002 RPM, Non Contact : ± 0.01 RPM Stability : Contact: ± 0.1 rpm, Non Contact: 1 Teeth : 6 rpm to 4000 rpm = ± 0.1 rpm  4001 rpm to 8000 rpm = ± 0.2 rpm 5 Teeth : 8001 rpm to 40,000 rpm = better than ± 0.5 rpm 17 Teeth : 40,001 rpm to 1,36,000 rpm = better than ± 0.8 rpm Accuracy : Contact : 6 rpm to 4000 rpm = ± 0.005% of rdg + 0.1 rpm 4001 rpm to 8000 rpm = ± 0.005% of rdg Non Contact : 1 Teeth : 6 rpm to 4000 rpm = ± 0.005% of rdg + 0.1 rpm  4001 rpm to 8000 rpm = ± 0.005% of rdg 5 Teeth : 8001 rpm to 40,000 rpm = ± 0.005% of rdg 17 Teeth : 40,001 rpm to 1,36,000 rpm = ± 0.005% of rdg Display : 7” True colour TFT LCD Display with Touch screen Stability Time : Within 5 seconds Within 5 seconds : < 50dB Noise level : < 50dB Motor : Ultra stable motor with high resolution Encoder & Drive Power supply : 230V AC ± 10% / 50Hz (Optional 110V AC) Power Consumption : 750 VA Outer Enclosure Construction : Aluminium Anodised Overall Dimension : 260mm L x 440mm W x 230mm H (Approx.) Instrument Weight :13 kg(Approx.)