Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Model: TCAL 1501 / 600
Display: 4.3 inch True TFT LCD Display with Touch screen
Temperature Range : Amb. +5 to 600°C
Resolution: 0.01°C
Stability: ± 0.05°C
Radial uniformity: Better than ± 0.5°C
Measure inputs: RTD-PT 100, PT 1000 / TC - J, K, R, S, T, E, B , N / mA, mV, ohms
Temperature Readout: C
Stabilization Time: 15 minutes
Heating time: 30 mins (25 to 600°C)
Cooling time: 50 mins (600 to 100°C )
Well Dimension: 30 x 150 mm (dia x height)
Test sensor immersion depth: 140 mm
Standard well holes in mm: 5.1, 6.2, 6.2 & 8.1
PC Interface (optional): RS 232 with automatic calibration software
UUC Sensor supply output: 24V DC ± 10% / 50mA max.
Power supply: 230V AC ± 10% / 50Hz (optional 110V AC)
Power Consumption: 1200 VA
Switch test: Provided
Overall Dimension in mm: 285 x 155 x 330 (L x B x H) (Approx.)
Weight: 8.5 kg (without well insert) (Approx.)
Model: TCAL 1501 / 1200
Display: 4.3” True TFT LCD Display with Touch screen
Temperature Range: 300 to 1200°C
Resolution: 0.1°C
Stability: Better than ± 0.5°C
Radial uniformity: Better than ± 2°C
Stabilization Time: 30 minutes
Temperature readout: °C
Heating time: 50 mins (Amb. to 1200°C)
Cooling time: 120 mins (1200 to 100°C )
Well Dimension: 39 x 180 x 140 mm (dia x height x depth)
Standard well holes in mm: 5.2, 6.2, 6.2, 10.1 & 12.1
Power supply: 230V AC ± 10% / 50Hz (Optional 110V AC)
Power Consumption: 1900 VA
Overall Dimension in mm: 340 x 175 x 425 (L x B x H) (Approx.)
Weight: 18 kg (without well insert) (Approx.)
MODEL : HCAL 1104U - V2
Display : 7” True Colour TFT Touch Screen Display
Control Range* : 5 to 60°C / 3 to 95 % RH*
Dew Point Temperature Range (Psychometric Calculated) : −30°C to 45°C
Psychometric Calculated Indication :
Dew / Frost Point (Dp / Fp), Wet Bulb Temperature (Tw), Vapour Partial Pressure (E), Vapour Saturation Pressure (Ew), Mixing Ratio by Weight (Dry) (g / kg), Enthalpy (H) (KJ / kg), Specific Humidity (Moisture) (g / kg), Absolute Humidity (Moisture) (g / m³), Volume Mixing Ratio (Dry) (ppm)
Calculation Method : WMO Method
Resolution : 0.01 °C / 0.01 % RH
Display Stability : Better than ± 0.03 °C / ± 0.15 % RH
Chamber Stability @ 25°C ** : Temperature ± 0.1°C, Humidity ± 0.3 % RH
Chamber Uniformity @ 25°C ** : Temperature ± 0.2°C, Humidity ± 0.5 % RH
Test Sensor Insert Port : Interchangeable Acrylic Door is provided on front side of the chamber with PG21 gland (cable or sensor size range from 13 to 18 mm) × 3 Nos
External Humidifier Water Tank Capacity : 6 Litres (Approx.) (NOTE : 3 Liter filling is enough for our application)
Humidifier Liquid : Distilled Water
Humidifying Time : 2 % RH / sec (50 to 90 % RH)
Dehumidifying Time : 6 % RH / sec (50 to 10 % RH)
Test Chamber Area : 230 mm DIA × 170 mm D (Approx.)
Power Supply : 230 V AC ± 10 % / 50 Hz (Optional 110 V AC)
Power Consumption : 1000 VA
Construction : Inner Chamber SS 310 / Outer MS Powder Coating
Overall Dimension : 436 mm L × 676 mm W × 368 mm H (Approx.)
Weight : 46 kg (Without Accessories) + 6 kg (Standard Accessories) (Approx.)
Model: TCAL 1401 / 1200
Display: 0.58” (15mm)(Block) / 0.3”(7.8mm) (Set) 4 digit LCD Display with 4 keys
Temperature Range: 500 to 1200°C
Resolution: 1°C
Stability: ± 2°C
Radial Uniformity: Better than: ± 2°C
Temperature readout: °C
Heating time: 50 mins (Amb. To 1200 °C)
Cooling time: 120 mins (1200 to 100 °C)
Stabilization time: 30 minutes
Well Dimension (dia. X height): 39 x 150 mm
Standard well holes in mm: 5.2, 6.2, 6.2, 10.1 & 12.1
Power supply: 230V AC ± 10% / 50Hz (Optional 110V AC)
Power consumption: 1900 VA
Overall Dimension in mm: 340 x 175 x 425 (L x B x H)(Approx.)
Instrument Weight: 18 kg (without well insert) (Approx.)
The RPMC 1700 Series is high precision Tachometer calibrator, generates true reference rotation per minute (RPM). This calibrator uses “German technology” with high speed motor, high precision encoder and adoption of a new power full 32 bit CPU in control drive, featuring automated gain tuning function, stability, stable stop, rugged in use and many more.
Due to it’s light weight and rugged Aluminium enclosure, it is suitable for in-house and on-site calibration of contact / non contact Tachometer, Tacho coil, Tacho generator, RPM indicator, RPM transmitter, Speedo meter, Proximity sensor, Stroboscope, etc.,.
Model : RPMC 1700 - 3A
Control Range :Contact : 0 to 8000 RPM
Non Contact : 0 to 1,20,000 RPM
Resolution : 0.001 RPM
Display Stability : Contact : ± 0.002 RPM, Non Contact : ± 0.01 RPM
Stability : Contact: ± 0.1 rpm,
Non Contact:
1 Teeth : 6 rpm to 4000 rpm = ± 0.1 rpm
4001 rpm to 8000 rpm = ± 0.2 rpm
5 Teeth : 8001 rpm to 40,000 rpm = better than ± 0.5 rpm
17 Teeth : 40,001 rpm to 1,36,000 rpm = better than ± 0.8 rpm
Accuracy : Contact : 6 rpm to 4000 rpm = ± 0.005% of rdg + 0.1 rpm 4001 rpm to 8000 rpm = ± 0.005% of rdg
Non Contact :
1 Teeth : 6 rpm to 4000 rpm = ± 0.005% of rdg + 0.1 rpm
4001 rpm to 8000 rpm = ± 0.005% of rdg
5 Teeth : 8001 rpm to 40,000 rpm = ± 0.005% of rdg
17 Teeth : 40,001 rpm to 1,36,000 rpm = ± 0.005% of rdg
Display : 7” True colour TFT LCD Display with Touch screen
Stability Time : Within 5 seconds
Within 5 seconds : < 50dB
Noise level : < 50dB
Motor : Ultra stable motor with high resolution Encoder & Drive
Power supply : 230V AC ± 10% / 50Hz (Optional 110V AC)
Power Consumption : 750 VA
Outer Enclosure Construction : Aluminium Anodised
Overall Dimension : 260mm L x 440mm W x 230mm H (Approx.)
Instrument Weight :13 kg(Approx.)
SANSEL Model BCAL 40, Black body Calibrator is used to measure the accuracy and performance of
non-contact fever detection systems, like medical thermometer & image scanner. Now it is being used in relation to COVID-19 (corona virus). This Blackbody Source meets the demand for a simple cost effective solution but high accurate device for the calibration of thermal imager and IR thermometers that are used at temperature around that of the human body.
Unlike Heat only devices, This model uses a solid state Heat & cool Technology, so that this can be generate both Heat and Cool. This having benefits to maintain the block temperature in different ambient temperature.
BCAL 40 using True colour 3.5” Touch screen display, easy to read multi parameter at the same time like Block temperature, Set temperature, Control status, Output % level, range of the equipment, displays both °C & °F and two Touch screen soft keys are used for settings and one more advantage of help menu to guide the operating Instruction of the equipment. Hence no need of hard copy of Instruction manual.
Model: BCAL 40
Display: 3.5 inch True TFT LCD Display with Touch screen
Temperature Range:
Body mode: 20 to 50°C / 68 to 122°F,
Surface mode: 0 to 100°C / 32 to 212°F
Resolution : 0.01°C
Stability: ± 0.03°C
Uniformity: ± 0.3°C
Stabilization Time: 10 minutes
Temperature readout: °C & °F at a time
Heating time: 10 mins (Amb. To 50°C )
Power supply: 90 to 260V AC/DC / 50/60Hz
Power Consumption: Less than 100 VA
Aperture area: 25mm
Emissivity: 0.950
Overall Dimension: 210 x 210 x 140 (L x B x H)(Approx.)
Instrument Weight: 3.7 kg
“SANSEL” Series BCAL 1502 is a Micro controller Based Precision Temperature Calibrators Generates True Reference Temperature. The Temperature Controller of the Calibrators Uses a Auto Tune PID Control Algorithm. Infra red thermometer & online pyrometer calibration is performed by comparison of the temperature measured by UUC and target temperature indicated by the calibrator or using standard pyrometer. Focus the Unit Under Calibration (UUC) to be Calibrate to the target point given in BCAL 1502. Set the Temperature from the Touch screen display. Both True and set Temperature can be read. When Stabilization Occurs, Simply Read the Temperature and re-Calibrate the UUC.
Model: BCAL 1502
Display: 4.3 inch True TFT LCD Display with Touch screen
Temperature Range: 500 to 1500 °C
Resolution: 0.1°C
Stability: ± 1°C
Radial Uniformity: ± 1% of reading
Bath Temperature Control: Digital Temperature Controller with Auto Tune PID Algorithm
Temperature readout: °C
Aperture area: 30mm
Emissivity: 0.950
Power supply: 230V AC ± 10% / 50Hz (Optional 110V AC)
Power Consumption: 4 KVA
Dimension (W*D*H) (Approx.): 580mm W x 450mm D x 390mm H
Instrument Weight (Approx): 45 kg
Model: TCAL 1404/500
Display: 2.8" True TFT with Touch screen
Temperature Range: Amb. + 5 to 500 °C
Radial uniformity: (Better than) ±0.05°C
Resolution: 0.01 °C
Stability: ±0.08 °C
Temperature readout: °C
Heating time: Amb to 500 --> 25 min
Cooling time: 500 to 50--> 1 hr 20 min
Stabilization time: 15 mins
Well Dimension(dia. x height): 20 x 100 mm
Well immersion depth: 90 mm
Standard well holes in mm: 6.2 x 2nos
Power supply: 230V AC ± 10% / 50Hz (Optional 110V AC)
Power consumption: 350 w
Overall Dimension in mm: 170 x 95 x 183 mm
Instrument Weight: 3.75 Kg
Model: TCAL 1404/300
Display: 2.8" True TFT with Touch screen
Temperature Range: Amb. + 5 to 300 °C
Radial uniformity: (Better than) ±0.03°C
Resolution: 0.01 °C
Stability: ±0.04 °C
Temperature readout: °C
Heating time: Amb to 300 -->23 min
Cooling time: 300 to 50-->30 min
Stabilization time: 15 mins
Well Dimension(dia. x height): 20 x 100 mm
Well immersion depth: 90 mm
Standard well holes in mm: 6.2 x 2nos
Power supply: 230V AC ± 10% / 50Hz (Optional 110V AC)
Power consumption: 250 w
Overall Dimension in mm: 170 x 95 x 183 mm
Instrument Weight: 2.75 Kg
Model TCAL: 1404/-15
Display: 2.8' True TFT with Touch screen
Temperature Range: -15 to 120 °C
Radial uniformity: (Better than) ±0.03°C
Resolution: 0.01 °C
Stability: ±0.03 °C
Temperature readout: °C
Heating time: Amb to 120-->25 min, -15 to Amb -->5 min
Cooling time: Amb to -15 -->20 min, 120 to 50 -->8 min
Stabilization time: 10 mins
Well Dimension(dia. x height): 20 x 90 mm
Well immersion depth: 90 mm (throw hole)
Standard well holes in mm: 6.2 x 2nos
Power supply: 80 to 264VAC / 113 to 370VDC / 47 to 63Hz
Power consumption: 100 w
Overall Dimension in mm: 170 x 95 x 183 mm
Instrument Weight: 3.5 Kg
Model: TCAL 1404/-5
Display: 2.8' True TFT with Touch screen
Temperature Range: -5 to 100°C
Radial uniformity: (Better than) ±0.03°C
Resolution: 0.01 °C
Stability: ±0.03 °C
Temperature readout: °C
Heating time: Amb to 100-->15min, -5 to Amb -->3 min
Cooling time: Amb to -5 -->15min, 100 to 50-->4 min
Stabilization time: 10 mins
Well Dimension(dia. x height): 20 x 90 mm
Well immersion depth: 90 mm (throw hole)
Standard well holes in mm: 6.2 x 2nos
Power supply: 80 to 264VAC / 113 to 370VDC / 47 to 63Hz
Power consumption: 100 w
Overall Dimension in mm: 170 x 95 x 183 mm
Instrument Weight: 3.5 Kg