Products

Model :DN 1000 Display : 0.5” 3 ½ Digit 7 segment Red LED Range : 0 to 19.9 & 199.9 NTU Resolution : 0.1 NTU Detector : Photo Diode Test Tube : 30mm Dia Clear Glass Test tube x 4 nos Light Source : High Intensity 5mm White LED Operating Environment : 0 to 50 °C / 20 to 95 % RH non condensing Power supply : 230V AC / 50 Hz ± 10% Overall Dimension in mm : 220 x 200 x 110 (L x B x H) Instrument Weight : 1.7 kg (Approx.)

Model: Pcal 1300 / 700 bar Range (bar): 0 to 700 bar Pressure media: Oil & Water Pressure pump: CT – 02 Display: 128 × 64 COG Graphic LCD with White LED Backlight Resolution (bar): 6 digit user selectable Instrument Port: ½” BSP Male x 10 mm long Instrument dimension: 100 × 100 × 55 (W × H × D) mm Instrument Weight: 400 gms (Approx.) Stability time: 1 to 2 mins Accuracy: ± 0.05% FS Pressure units * (selectable): bar, mbar, MPa, kPa, Pa, PSI, kg/cm², inHg, cmHg, mmHg, mH₂O, ftH₂O, inH₂O, cmH₂O, mmH₂O Pressure Zero: One touch zero provided on front key Pressure Peak: Maximum & minimum with user reset option Pressure overflow: FS X 2 (Max.) Pressure burst: FS X 3 (Max.) Temp.Measure: RTD - PT 100 (2,3,4, wire selectable) Temp. Range: -199.999 to 850.000 mA Measure: 0-24 mA (scalable) Display scale: -99999 to 99999 counts (for mA measure input) Switch test: Provided Display Hold: One touch hold provided on front key Power Supply: 9V DC ±5% / 600 mAh Rechargeable battery with battery life 20 hours without backlight (or) 9V DC adapter / 230V AC supply operated Pump Weight (Approx.): 14 kg PC Interface (optional): RS-485 (2 wire) (Note: connect to PC using USB to RS 485 converter supplied along with PC software) PC Software (optional): Windows-based semi-automatic calibration software (Optional)

Model: DCM 200 Display: 0.5” 3 ½ Digit 7 segment Red LED Range: 0 – 20 μS/ 200 μS/ 2000 μS/ 20 mS / 200 mS ( 5 range selection using front rotary switch ) Resolution: 0.01 / 0.1 / 1 for μS range & 0.01 / 0.1 for mS range Accuracy: ± 1 % of Range ± 1 digit Temperature Compensation: 0 to 50°C (Manual) continuously adjustable Cell Constant: Adjustable with indication on display Sensor: Platinum Conductivity cell (1.0 cell constant) with Banana male connector Input Connection: Banana socket Operating Environment: 0 to 50 °C / 20 to 95 % RH non condensing Power supply: 230V AC / 50 Hz ± 10% Overall Dimensions in mm: 185 x 235 x 65 ( L x B x H ) Instrument weight: 1.6 kg (Approx.)

Model : TCAL 1503 / -100 Display : 4.3” True colour TFT display with touch screen Temperature Range : -100°C to 40°C @20°C to 30°C Ambient Resolution : 0.01 °C Block Stability (30 mins) : Better than ± 0.03°C at full range Block Radial Uniformity : ± 0.05 °C at full range Temperature Read out : °C / °F (selectable) Heating time : 25°C to 40°C : 30 min -100 to 25°C : 80 min Cooling Time: 25°C to -100°C : 85 min 40 to 25°C : 12 min Stabilization time : 15 minutes Insert Dia. x Height: 30 x 120 mm Test sensor immersion depth: 115 mm Standard well holes in mm : Insert No. 1 : 5.1, 6.2, 6.2 & 8.1 Insert No. 2 : 6.2, 6.2 & 10.2 Measure inputs: RTD – PT 100, PT 1000, TC – J, K, R, S, T, E, B, N , Analog – mA, V, mV, Ohms Cold junction Accuracy: ± 0.3°C Communication: RS 485 MODBUS Switch Test: Provided Sensor supply output: 24V DC ± 10% / 50mA max. Power supply: 230V AC ± 10% / 50Hz (Optional 110V AC) Power Consumption : 500 VA Overall Dimension in mm : 356 x 210 x 534 (L x B x H)(Approx.) Instrument Weight :15.9 kg(with well insert)(Approx.)

Model: HTD 200 Display: 2.8” True colour TFT display with touch screen Range: Temperature: -40 to 85 °C (T), Humidity: 0 to 100% RH (RH) Resolution: 0.01 °C / 0.01 % RH Accuracy at 23 °C± 5 °C : ± 0.2 °C / ±0.8 % RH Psychometric calculated indication: Dew / Frost point ( Dp / Fp ) Wet Bulb Temperature ( Tw ) Vapour partial pressure ( E ) Vapour Saturation pressure ( Ew ) Mixing ratio by weight (dry) ( g / kg ) Enthalpy ( H ) ( KJ / kg ) Specific Humidity (moisture) ( g / kg ) Absolute Humidity (moisture) ( g / m³ ) Volume mixing ratio (dry) ( ppm ) Calculation method: WMO method Display refresh rate: 1 s (typical) Calibration : 5 point lookup table for both Temperature & Humidity Alarm: Audible & Visible user settable individual High & Low alarm set with alarm mode selection for all the 3 parameters Touch sound: On / Off option available Logging interval: 1 sec to 24 Hrs programmable Memory capacity: 4 to 32 GB Internal storage Data download: Via USB Battery charging port: USB C type Integrated battery: 3.7V / 10,000 mAh Inbuilt rechargeable polymer Li-ion battery Backlight time interval: 0(OFF) to 59 mins : 59 secs (user adjustable) Brightness adjustment: 10 to 100% (user adjustable) Application environment range: -10 to 60 °C / 0 to 100% RH (non condensed) Storage environment range: -10 to 45 °C / 10 to 90% RH Housing material: ABS with anti-slip grip silicon cover Protection class: IP40 Overall Dimension in mm: 35 x 80 x 165 mm ( L x B x H) Instrument Weight: 560 g (Approx.)

Model : TCAL 1503 / -40 Display : 4.3” True colour TFT display with touch screen Temperature Range : -40 to 120°C @23°C Ambient Resolution : 0.01 °C Block Stability : Better than ± 0.03°C at full range Block Radial Uniformity : ± 0.02°C at full range Block Axial Uniformity (upto 40mm) : ± 0.18°C at -45°C ± 0.1°C at 0°C ± 0.05°C at 50°C ± 0.11°C at 100°C ± 0.17°C at 120°C Temperature Read out : °C / °F (selectable) Loading effect: Better than ± 0.08°C hysteresis: Better than ± 0.03°C Cooling time : 30 mins (25 to -45 °C) 15 mins (25 to -30 °C) 65 mins (120 to 25 °C) Heating time : 25 mins (25 to 120 °C) 75 mins (-45 to 120 °C) 52 mins (-45 to 25 °C) Stabilization time: 10 minutes Insert (Dia. x Height): 30 x 160 mm Test sensor immersion depth: 130 mm Standard well holes in mm: Insert No. 1 → 5.1, 6.2, 6.2 & 8.1, Insert No. 2 → 6.2, 6.2 & 10.2 Measure inputs: RTD-PT 100, PT 1000 / TC - J, K, R, S, T, E, B , N , Analog – mA, V, mV, ohms Cold junction Accuracy: ± 0.3°C UUC Sensor supply input: 24V DC ± 10% / 50mA max. Power supply: 230V AC ± 10% / 50Hz (optional 110V AC) Power Consumption: 500 VA Switch Test : Provided Overall Dimension in mm: 390 x 185 x 356 (L x B x H) (Approx.) Weight: 17.3 kg (with well insert) (Approx.)

Model: PI – 541A Display: 6 Digit 7 segment RED LED Inputs: 0 - 20 mA, 0 to 75 mV, -10 to 10 V DC, 0 – 4000 Ω (H & L Limit Programmable) RTD - PT 100, PT-1000, Thermocouple - J, K, R, S, T, B, N, E Cold junction Accuracy: ± 0.3°C Resolution: 0.0001 / 0.001 / 0.01 / 0.1 / 1°C Selectable for Analog 0.01°C for RTD and 0.1°C for TC Unit selection: °C / °F (for RTD & TC inputs) Linearization: Programmable custom Linearization provided (1 - 21 points) Input signal filter: 1 – 100% user configurable Cold junction compensation: Automatic inbuilt ‘CJC’ is provided Relay Output* (optional): 2 Relay (5A rated) with 4 Relay Status Selection, Hysteresis, Cyclic Delay Alarm settings: Front key settable Alarm indication : Two LED on front panel Re Transmission* (optional): Opto Isolated Analog Output 4 - 20 mA or 0 - 10V DC for process variable PC communication* (optional): RS 485 (2 wire) MODBUS protocol PC Software* (optional): Monitoring, Data logging, Report & graph Sensor excitation Supply: 24 V DC ±10% @ 100 mA Power supply: 90 to 270 V AC / DC / 50/60 Hz Front panel : IP 65 protection Operating environment: 0 to 50°C / 5 to 95% RH non condensing Overall Dimensions: 48(H) X 96(W) X 110(D) mm Cut out Dimension: 44(H) x 90(W) mm Enclosure: ABS plastic Weight: 350 grams (Approx.)

Model: BW 16D (4” display) & BW 17D (8” display) Display: 6 digit 2”, 4”, & 8” height 7 segment red LED display Range: 0 – 999999 counts Resolution: 1 count / pulse Input: 3-30V DC pulse from Proximity sensor, Photoelectric non-contact sensor, Encoder Potential free contacts, Limit switch, etc.,. Memory backup: Provided if power is failure Input speed: 3.5 kHz (Max.) Sensor supply: 12V DC (±10%) 50mA Power Supply: 230V AC / 50Hz Working temperature: 0 – 50°C Weight: 8 kg

Model : pH 600 - 1 Display : 4 + 4 Digit 0.5” & 0.39” 7 Seg RED LED Display Input Impedance : >10 Ohms Range : -2 to 16 pH Resolution : 0.01 pH Temperature sensor: RTD - PT 100 (3 wire) Temp. Compensation: Manual / Automatic (-20.0 to +150.0ºC) Electrode Input: Combined Electrode with BNC Attachment Accuracy : ± 0.01 pH ± 1 digit Set Point - 1 & 2: Two Set Point with 6 Relay Status Selectable Relay Output : Relay - 1 for Setpoint - 1, Relay - 2 for Setpoint - 2 with 5A Rating Relay Hysteresis : 0 to 5 pH (user adjustable)(only for High & Low control modes) Relay Cyclic delay : 0 to 100 seconds (user adjustable)(only for High & Low control modes) Alarm Output(optional) inbuilt audible buzzer with front key reset Optional Re. Tx. output Galvanically Isolated : 4 - 20 mA Optional Comm. output Isolated RS 485 Comm. Protocol MODBUS RTU Operating Environment : -10 to 50ºC / 10 to 95 % RH Non Condensing Power Supply : 90 to 270V AC / DC 50Hz Dimension : 96 x 96 x 85 mm. Cutout Dimension : 92 x 92 mm Weight : 500 grams (Approx.)

Model: TDS 602-1 Display: 4 + 4 Digit 0.5” & 0.39” 7-Segment Red LED Display Cell Constant*: 0.01 / 0.1 / 1 (user selectable, depends on range) Range (any one): 1–20 ppm, 5–200 ppm, 10–2000 ppm, 1–20 ppt, 5–200 ppt Accuracy: ±1% of range +1 digit Resolution: 0.01 ppm to 0.1 ppt (depends on range) Temperature Sensor: RTD – PT100 (3-wire) Temperature Coefficient: 0 to 3% / °C (user adjustable) Temperature Compensation: Manual / Automatic (-20.0 to +150.0 °C) Electrode Input: Conductivity cell on rear panel Set Point – 1 & 2: Two set points with 6 relay status selectable Relay Output: Relay-1 for Setpoint-1, Relay-2 for Setpoint-2 with 5A rating Relay Hysteresis: 0 to 500 counts (user adjustable) (only for High & Low control modes) Relay Cyclic Delay: 0 to 100 seconds (user adjustable) (only for High & Low control modes) Alarm Output (optional): Inbuilt audible buzzer with front-key reset Optional Re-Tx Output: Galvanically isolated 4–20 mA Optional Comm. Output: Isolated RS-485 Communication Protocol: MODBUS RTU Operating Environment: -10 to 50 °C / 10 to 95% RH non-condensing Power Supply: 90 to 270 V AC / DC, 50 Hz Enclosure: ABS plastics Dimension: 96 × 96 × 85 mm Cutout Dimension: 92 × 92 mm Weight: 350 grams (Approx.)

Model: CC 603 - 1 Display: 4 + 4 Digit 0.5” & 0.39” 7 Seg RED LED Display Range (any one): 1 – 20µS, 5 – 200µS, 10 to 2000µS, 1 to 20mS, 5 to 200mS Resolution: 0.01µS to 0.1mS (depends on range) Accuracy: ±1% of range ±1 digit Cell Constant*: 0.01 / 0.1 / 1 (user selectable, depends on range) Temperature Sensor: RTD – PT 100 (3 wire) Temperature Co-efficient: 0 to 3% / °C (user adjustable) Temperature Compensation: Manual / Automatic (-20.0 to +150.0°C) Electrode Input: Conductivity cell on rear panel Set Point – 1 & 2: Two set points with 6 relay status selectable Relay Output: Relay-1 for Setpoint-1, Relay-2 for Setpoint-2 with 5A rating Relay Hysteresis: 0 to 500 counts (user adjustable) (only for High & Low control modes) Relay Cyclic Delay: 0 to 100 seconds (user adjustable) (only for High & Low control modes) Alarm Output (optional): Inbuilt audible buzzer with front key reset Optional Re-Tx Output: Galvanically isolated 4 – 20 mA Optional Comm. Output: Isolated RS-485 Comm. Protocol: MODBUS RTU Operating Environment: -10 to 50°C / 10 to 95% RH non-condensing Power Supply: 90 to 270V AC / DC, 50Hz Dimension: 96 × 96 × 85 mm Cutout Dimension: 92 × 92 mm Weight: 350 grams (Approx.)

Model: ORT 601-1 Display: 4 + 4 Digit 0.5” & 0.39” 7-Segment Red LED Display Range: -1999 to 1999 ORP Accuracy: ±1 ORP ±1 digit Resolution: 1 ORP Electrode Input: Platinum electrode with BNC attachment Set Point – 1 & 2: Two set points with 6 relay status selectable Relay Output: Relay-1 for Setpoint-1, Relay-2 for Setpoint-2 with 5A rating Relay Hysteresis: 0 to 5 ORP (user adjustable) (only for High & Low control modes) Relay Cyclic Delay: 0 to 100 seconds (user adjustable) (only for High & Low control modes) Input Impedance: >10¹² ohms Alarm Output (optional): Inbuilt audible buzzer with front-key reset Optional Re-Tx Output: Galvanically isolated 4–20 mA Optional Comm. Output: Isolated RS-485 Communication Protocol: MODBUS RTU Operating Environment: -10 to 50 °C / 10 to 95% RH non-condensing Power Supply: 90 to 270 V AC / DC, 50 Hz Dimension: 96 × 96 × 85 mm Cutout Dimension: 92 × 92 mm Weight: 350 grams (Approx.)