'auto manual temperature compensation conductivity tester'

Model: CC 603 - 1 Display: 4 + 4 Digit 0.5” & 0.39” 7 Seg RED LED Display Range (any one): 1 – 20µS, 5 – 200µS, 10 to 2000µS, 1 to 20mS, 5 to 200mS Resolution: 0.01µS to 0.1mS (depends on range) Accuracy: ±1% of range ±1 digit Cell Constant*: 0.01 / 0.1 / 1 (user selectable, depends on range) Temperature Sensor: RTD – PT 100 (3 wire) Temperature Co-efficient: 0 to 3% / °C (user adjustable) Temperature Compensation: Manual / Automatic (-20.0 to +150.0°C) Electrode Input: Conductivity cell on rear panel Set Point – 1 & 2: Two set points with 6 relay status selectable Relay Output: Relay-1 for Setpoint-1, Relay-2 for Setpoint-2 with 5A rating Relay Hysteresis: 0 to 500 counts (user adjustable) (only for High & Low control modes) Relay Cyclic Delay: 0 to 100 seconds (user adjustable) (only for High & Low control modes) Alarm Output (optional): Inbuilt audible buzzer with front key reset Optional Re-Tx Output: Galvanically isolated 4 – 20 mA Optional Comm. Output: Isolated RS-485 Comm. Protocol: MODBUS RTU Operating Environment: -10 to 50°C / 10 to 95% RH non-condensing Power Supply: 90 to 270V AC / DC, 50Hz Dimension: 96 × 96 × 85 mm Cutout Dimension: 92 × 92 mm Weight: 350 grams (Approx.)

Model: DCM 200 Display: 0.5” 3 ½ Digit 7 segment Red LED Range: 0 – 20 μS/ 200 μS/ 2000 μS/ 20 mS / 200 mS ( 5 range selection using front rotary switch ) Resolution: 0.01 / 0.1 / 1 for μS range & 0.01 / 0.1 for mS range Accuracy: ± 1 % of Range ± 1 digit Temperature Compensation: 0 to 50°C (Manual) continuously adjustable Cell Constant: Adjustable with indication on display Sensor: Platinum Conductivity cell (1.0 cell constant) with Banana male connector Input Connection: Banana socket Operating Environment: 0 to 50 °C / 20 to 95 % RH non condensing Power supply: 230V AC / 50 Hz ± 10% Overall Dimensions in mm: 185 x 235 x 65 ( L x B x H ) Instrument weight: 1.6 kg (Approx.)

Model: TDS 602-1 Display: 4 + 4 Digit 0.5” & 0.39” 7-Segment Red LED Display Cell Constant*: 0.01 / 0.1 / 1 (user selectable, depends on range) Range (any one): 1–20 ppm, 5–200 ppm, 10–2000 ppm, 1–20 ppt, 5–200 ppt Accuracy: ±1% of range +1 digit Resolution: 0.01 ppm to 0.1 ppt (depends on range) Temperature Sensor: RTD – PT100 (3-wire) Temperature Coefficient: 0 to 3% / °C (user adjustable) Temperature Compensation: Manual / Automatic (-20.0 to +150.0 °C) Electrode Input: Conductivity cell on rear panel Set Point – 1 & 2: Two set points with 6 relay status selectable Relay Output: Relay-1 for Setpoint-1, Relay-2 for Setpoint-2 with 5A rating Relay Hysteresis: 0 to 500 counts (user adjustable) (only for High & Low control modes) Relay Cyclic Delay: 0 to 100 seconds (user adjustable) (only for High & Low control modes) Alarm Output (optional): Inbuilt audible buzzer with front-key reset Optional Re-Tx Output: Galvanically isolated 4–20 mA Optional Comm. Output: Isolated RS-485 Communication Protocol: MODBUS RTU Operating Environment: -10 to 50 °C / 10 to 95% RH non-condensing Power Supply: 90 to 270 V AC / DC, 50 Hz Enclosure: ABS plastics Dimension: 96 × 96 × 85 mm Cutout Dimension: 92 × 92 mm Weight: 350 grams (Approx.)

Model: pH 302 Display: 16 Character x 2 line LCD with Backlight Range: 0 to 14 pH / -1999 to +1999 mV /0 – 150°C Resolution: 0.01 pH / 1 mV / 0.1°C Accuracy: ± 0.01 pH ± 1 digit / ± 1 mV ± 1 digit /± 0.5°C ± 1 digit Input Impedance: > 10¹² Ohms Temperature Compensation: 0 to 150°C Manual / Automatic Electrode: Combined pH Electrode with BNC attachment Temperature sensor: Provided with 3 pin female socket pH / ORP Input connection: BNC socket Operating Environment: 0 to 50 °C / 20 to 95 % RH non condensing Temperature connection: 3 pin male socket Power supply: 230V AC / 50 Hz ± 10% Overall Dimensions in mm: 190 x 185 x 75 ( L x B x H ) Instrument weight: 1.7 kg (Approx.)

Model: TDS 100 Display: 0.5” 3 ½ Digit 7 segment Red LED Range: 0 – 20 ppm/ 200 ppm/ 2000 ppm/ 20ppt / 200ppt ( 5 range selection using front rotary switch ) Resolution: 0.01 / 0.1 / 1 for ppm range & 0.01 / 0.1 for ppt range Accuracy: ± 1 % of Range ± 1 digit Temperature Compensation: 0 to 50°C (Manual) continuously adjustable Cell Constant: Adjustable with indication on display Sensor: Platinum Conductivity cell (1.0 cell constant) with Banana male connector Input Connection: Banana socket Operating Environment: 0 to 50 °C / 20 to 95 % RH non condensing Power supply: 230V AC / 50 Hz ± 10% Overall Dimensions in mm: 185 x 235 x 65 ( L x B x H ) Instrument weight: 1.6 kg (Approx.)

Model : pH 600 - 1 Display : 4 + 4 Digit 0.5” & 0.39” 7 Seg RED LED Display Input Impedance : >10 Ohms Range : -2 to 16 pH Resolution : 0.01 pH Temperature sensor: RTD - PT 100 (3 wire) Temp. Compensation: Manual / Automatic (-20.0 to +150.0ºC) Electrode Input: Combined Electrode with BNC Attachment Accuracy : ± 0.01 pH ± 1 digit Set Point - 1 & 2: Two Set Point with 6 Relay Status Selectable Relay Output : Relay - 1 for Setpoint - 1, Relay - 2 for Setpoint - 2 with 5A Rating Relay Hysteresis : 0 to 5 pH (user adjustable)(only for High & Low control modes) Relay Cyclic delay : 0 to 100 seconds (user adjustable)(only for High & Low control modes) Alarm Output(optional) inbuilt audible buzzer with front key reset Optional Re. Tx. output Galvanically Isolated : 4 - 20 mA Optional Comm. output Isolated RS 485 Comm. Protocol MODBUS RTU Operating Environment : -10 to 50ºC / 10 to 95 % RH Non Condensing Power Supply : 90 to 270V AC / DC 50Hz Dimension : 96 x 96 x 85 mm. Cutout Dimension : 92 x 92 mm Weight : 500 grams (Approx.)

Model : DL 98HD Signal Input : RS 485(2 wire) Input Protocol : Modbus RTU Slave No. of. Channels : 32 FEATURES Ø It replace conventional 7 segment LED Ø Up to 32 input channels display Ø Custom selectable number of input No size limitation- Depends upon customer channels scope(HDMI compatible TV) Ø User configurable RS485 MODBUS setting Ø Low cost Ø User selectable title and Engineering units Ø Universal indicator for any type of industrial Ø Alarm set point and status indication process parameter Ø Adjustable display font size Ø Input from RS485 MODBUS RTU protocol Ø Custom adjustable colour, background, Ø HDMI output for display connectivity display, title and units Ø OLED TV display or any type of HDMI input Ø Inbuilt Data logging facility display device Ø Optional Ethernet output for computer Ø Pen drive option for Data download DISPLAY PARAMETER Temperature * Humidity * pressure * Flow & Total flow * Volume * Level * Production counting * RPM * m/min * Co2 * Volts * Current Power * pH * TDS * Conductivity, etc,. Application » Pharma industries » Automobile industries » Power industries » Petrochemical industries Food industries

“SANSEL” Series BCAL 1502 is a Micro controller Based Precision Temperature Calibrators Generates True Reference Temperature. The Temperature Controller of the Calibrators Uses a Auto Tune PID Control Algorithm. Infra red thermometer & online pyrometer calibration is performed by comparison of the temperature measured by UUC and target temperature indicated by the calibrator or using standard pyrometer. Focus the Unit Under Calibration (UUC) to be Calibrate to the target point given in BCAL 1502. Set the Temperature from the Touch screen display. Both True and set Temperature can be read. When Stabilization Occurs, Simply Read the Temperature and re-Calibrate the UUC. Model: BCAL 1502 Display: 4.3 inch True TFT LCD Display with Touch screen Temperature Range: 500 to 1500 °C Resolution: 0.1°C Stability: ± 1°C Radial Uniformity: ± 1% of reading Bath Temperature Control: Digital Temperature Controller with Auto Tune PID Algorithm Temperature readout: °C Aperture area: 30mm Emissivity: 0.950 Power supply: 230V AC ± 10% / 50Hz (Optional 110V AC) Power Consumption: 4 KVA Dimension (W*D*H) (Approx.): 580mm W x 450mm D x 390mm H Instrument Weight (Approx): 45 kg

Model: TCAL 1501 / 300 Display: 4.3 inch True TFT LCD Display with Touch screen Temperature Range : Amb. to 300°C Resolution: 0.01°C Stability: ± 0.03°C Radial uniformity: Better than ± 0.2°C Measure inputs: RTD-PT 50, 100, PT 1000 / TC - J, K, R, S, T, E, B , N / mA, mV, ohms Temperature Readout: C Stabilization Time: 15 minutes Heating time: 30 mins (25 to 600°C) Cooling time: 50 mins (600 to 100°C ) Well Dimension: 30 x 150 mm (dia x height) Test sensor immersion depth: 140 mm Standard well holes in mm: 5.1, 6.2, 6.2 & 8.1 PC Interface (optional): RS 232 with automatic calibration software UUC Sensor supply output: 24V DC ± 10% / 50mA max. Power supply: 230V AC ± 10% / 50Hz (optional 110V AC) Power Consumption: 1200 VA Switch test: Provided Overall Dimension in mm: 285 x 155 x 330 (L x B x H) (Approx.) Weight: 8.5 kg (without well insert) (Approx.)